Freematics ONE+ 차량 데이터 로거 -ESP32
(Freematics ONE+)
개요
- 본 제품은 Freematics ONE+ 차량 데이터로거 입니다.
- Freematics ONE 와 같이 OBD-II 동글 형태로 차량의 OBD 포트에 직접 꼽아 차량의 다양한 정보에 접근할 수 있는 제품이지만, ONE제품에 비해 진보된 차량 데이터로거입니다.
- 32비트 ESP32 MCU를 탑재하였습니다.
특징
- 240Mhz dual-core SoC processor
- High performance WIFI and BLE communication
- G-force measurement and motion/orientation detection
- High update rate GPS positioning
- Access to all standard OBD-II PIDs, DTC, VIN from vehicle ECU
- Car battery voltage reading
- Data storage in internal Flash or microSD card (up to 32GB)
- Exchanging data with other devices by USB or BLE
- Transmitting data remotely over WIFI or cellular network
- Programmable as Arduino with dedicated Arduino library
- Low power mode @10mA
-
Specifications
- Espressif ESP32 as main controller (520KB SRAM, 4MB Flash, programmed as Arduino)
- Integrated STM32 based OBD-II solution
- Integrated MEMS motion sensor
- M8030 10Hz GPS receiver (external)
- xBee seat for pluggable wireless communication modules
- SIM800L or SIM5360 bee modules for cellular network connectivity
- Enclosure dimensions: 60x48x20mm
Physical Interfaces
- OBD-II male connector
- microUSB port
- microSD card slot
- SIM card slot (when cellular module is present)
- GPS connector (Molex)
- xBee socket (5V VCC)
OBD-II Compatibility
Freematics ONE+ plugs into the OBD port usually located under the steering column or slightly to the left of it. To check if your vehicle is OBD-II certified, open your hood and find the sticker that looks like this:
Vehicles using following vehicle protocols are supported.
- CAN 500Kbps/29bit
- CAN 250Kbps/29bit
- CAN 500Kbps/11bit
- CAN 250Kbps/11bit
- KWP2000 Fast
- KWP2000 5Kbps
문서
연관제품
- 연관제품 1