USBtinyISP AVR 프로그래머
(USBtinyISP AVR Programmer)
개요
- 본 제품은 오픈소스 USB AVR 프로그래머입니다.
- 저렴하며, avrdude와 잘 동작하며, AVRStudio와 호환됩니다.
- 6핀, 10핀 커넥터가 같이 포함되어 있습니다.
- Arduino IDE와 잘 동작하며, 부트로더가 삭제된 아두이노에 새로운 부트로더를 플래쉬에 쉽게 다운로드 할 수 있으며, 부트로더 없이 스케치 코드를 프로그래밍 할 수 있습니다.
- 자세한 내용은 문서 섹션을 참고하십시오.
특징
- AVRdude compatible - support for usbtiny added in v5.5!
- USB drivers available for Windows using libusb, no drivers needed for Mac OS X or Linux.
- Durable off-the-shelf enclosure
- High speed! Max clock rate is 400KHz. Write speed:1Kb/s, read speed: 2Kb/s. (Atmega8 takes 8s to write, 4s to read/verify)
- 2 LEDs to indicate "USB/Power good" and "Busy"
- I/O is buffered to allow programming of 2V-6V targets (v2)
- Works with any AVR ISP chip with 64K of flash (or less) - does not work with Atmega1281/1280/2561/2560
- Powered off of 5V USB bus at less than 100mA to allow it to be used with unpowered USB hubs
- Easily accessable jumper to power target project off of USB (target must be 5V tolerant, of course)
- Remove the jumper and it will self-power but buffer the I/O to match the target device. (v2)