USBtinyISP AVR 프로그래머

(USBtinyISP AVR Programmer)

본 제품은 오픈소스 USB AVR 프로그래머입니다.
저렴하며, avrdude와 잘 동작하며, AVRStudio와 호환됩니다.
6핀, 10핀 커넥터가 같이 포함되어 있습니다.
Arduino IDE와 잘 동작하며, 부트로더가 삭제된 아두이노에 새로운 부트로더를 플래쉬에 쉽게 다운로드 할 수 있으며, 부트로더 없이 스케치 코드를 프로그래밍 할 수 있습니다.
자세한 내용은 문서 섹션을 참고하십시오.

AVRdude compatible - support for usbtiny added in v5.5!
USB drivers available for Windows using libusb, no drivers needed for Mac OS X or Linux.
Durable off-the-shelf enclosure
High speed! Max clock rate is 400KHz. Write speed:1Kb/s, read speed: 2Kb/s. (Atmega8 takes 8s to write, 4s to read/verify)
2 LEDs to indicate "USB/Power good" and "Busy"
I/O is buffered to allow programming of 2V-6V targets (v2)
Works with any AVR ISP chip with 64K of flash (or less) - does not work with Atmega1281/1280/2561/2560
Powered off of 5V USB bus at less than 100mA to allow it to be used with unpowered USB hubs
Easily accessable jumper to power target project off of USB (target must be 5V tolerant, of course)
Remove the jumper and it will self-power but buffer the I/O to match the target device. (v2)