트리플 CAN 보드 -ETH, NEO-M8M GNSS, SMPS, CAN FD x 1, CAN2.0B x 2
(Teensy 4.1 Triple CAN Board with ETH and u-blox NEO-M8M GNSS)
개요
- 본 제품은 트리플 CAN 보드 -ETH, NEO-M8M GNSS, SMPS, CAN FD x 1, CAN2.0B x 2입니다.
- CAN FD 포트 1개와 CAN 2.0B 포트 2개를 지원하는 제품이며, Ethernet magjack, u-blox NEO-M8M, 보드와 파이에 전원공급을 위한 SMPS 전원모듈을 장착하고 있는 제품입니다.
- USB-C 커넥터를 통해 ublox사의 ucenter 프로그램을 PC에서 사용이 가능합니다.
- Teensy 4.1 이 장착되어 있는 제품입니다.
특징
- Teensy 4.1 fitted
- Two Classic CAN and one CAN FD port
- Ethernet magjack
- On board SMPS for external 7 to 12v supply with reverse polarity protection
- Qwiic connector fitted for external sensors
- GNSS module
- u-blox NEO-M8M
- UART can be connected Serial2 or Serial3
- I2C can be connected to I2C0 or I2C1
- 1PPS connected to D35
- USB C connector on board
- Coin cell battery holder for back up. Requires CR1225 cell
- SMA connector for external antenna
- Red power LED
- Blue 1PPS LED
-
The GNSS module is an u-blox NEO-M8M module. Other GNSS module can be fitted on request such as the NEO-M8T timing GNSS.
An USB-C connector is fitted on board to enable to connect directly to a PC for monitoring and configuration.
- This is a Teensy 4.1 board with two Classic CAN and one CAN FD port, ethernet mag jack and u-blox NEO-M8M GNSS module. One board SMPS module can accept external 7 to 12v input with reverse polarity protection.
문서
연관제품
- 연관제품 1