Module nature: non-isolated boost module (BOOST)
Input voltage: DC 10V-60V
Input current: 10 (MAX)
Static working current: 10mA (when 12V rises to 20V, the higher the output voltage, the static current will increase)
Output voltage: 12-60V continuously adjustable (default output 19V shipment, if you need other voltage, please explain to the shopkeeper.)
Output current: 10A MAX, if more than 6A, please strengthen heat dissipation (related to the input and output pressure difference, the greater the pressure difference, the smaller the output current)
Constant current range: 0.2-10A
Output power: = input voltage*10A, such as: input 12V*10A=120W, input 24V*10A=240W,
Input 36V*10A=1360W, input 60V*10A=600W,
Working temperature: -40~+85 degrees (please strengthen heat dissipation when the ambient temperature is too high)
Working frequency: 150KHz
Conversion efficiency: 92%-96% (efficiency is related to input, output voltage, current, and pressure difference)
Input reverse connection protection: none (note that the positive and negative are not reversed)
Installation method: 4 3mm screw holes
Wiring mode: wiring output
Module size: length 85mm width 52mm height 21mm
Output voltage adjustment:
1. Adjust the CV-ADJ potentiometer, according to your battery or LED, set the output voltage to the voltage value you need. Turn the voltage down clockwise, turn up counterclockwise
Output current adjustment:
2. Adjust the CC-ADJ potentiometer clockwise about 20 turns, set the output current to the minimum, connect the LED, and adjust the CC-ADJ potentiometer to the current you need. For battery charging, after the battery is discharged, connect to the output and adjust the CC-ADJ to the current you need. (When charging, you must use the discharged battery to adjust, because the battery is left The more power, the lower the charging current.)
Note: Please do not use short-circuit method to adjust the current. The circuit structure of the boost module cannot be adjusted by short-circuit method.
