조절 가능 DC-DC 스텝다운 모듈 -디스플레이 장착
(Adjustable DC-DC Step-Down Module with Display)
개요
- 본 제품은 일정한 전류와 전압을 출력시킬 수 있는 스텝다운 전원 모듈로 배터리 충전에 사용이 가능한 제품입니다.
- 5V-30V의 전원을 입력 받아 스텝 다운 할 수 있으며 출력 전류는 0-5A입니다.
- 제품 옆면에 부착된 포텐셔미터 두개를 이용하여 각각 전압과 전류를 조절할 수 있습니다.
- 배터리 충전시 배터리 충전 상태를 표시하는 LED가 있습니다.
- TTL레벨의 RX/TX 라인이 있어 아두이노와 같은 마이크로컨트롤러와 통신할 수 있습니다.
- 알림: IN+, IN-, OUT+, OUT- 의 결선이 올바르지 않을 경우 모듈이 손상됩니다.
특징
- Module Properties: non-isolated constant current and voltage module
- Rectification: non-synchronous rectification
- Conversion efficiency: 95% (the highest)
- Switching frequency: 300KHz
- Output ripple: 50mV (max) 20M bandwidth
- Load Regulation: ± 0.5%
- Voltage Regulation: ± 2.5%
- Operating Temperature: -40℃to +85℃
- Voltmeter Ammeter
- Measurement accuracy: 0.1%
- Refresh rate: about 200ms / times
- Display: 0.28"digital tube
- Current Range: 0A-5A
- Voltage range: 5V-30V
- Please connect right as the printed :"IN-,IN+,OUT-, OUT+", or the Module will be burned.
문서
-
COMUNICATION PROTOCOL INSTRUCTION - This module can communicate with computer,so that the current and voltage reading can be displayed by the computer.
- Because the output of this module is a TTL level,inorde to communicate with computer, thid=s level signal has to be transfered to a RS232 level which can recognize by the computer, this module(eBay item number:321254713986)is used to do this job.
BAUD RATE: 9600 Bps - BB CC ADDR 00 XX XX CRC (current return conmmound)
- BB CC ADDR 01 XX XX CRC (Voltage return conmmound)
Among it: - BB CC is the Frame Header(2 bit)
- ADDR is the address of the module(1 bit)
- 00 is the command of current reading (1 bit)
- 01 is the command of Voltage reading(1 bit)
- XX XX random value (2 bit)
- CRC CRC verification
연관제품
- 연관제품 1