젯슨 나노/Xavier/NX/TX2 NX 용 A203 캐리어보드
(A203 (Version 2) Carrier Board for Jetson Nano/Xavier NX/TX2 NX)
개요
- 본 제품은 젯슨 나노/Xavier/NX/TX2 NX 용 A203 캐리어보드 입니다.
- 젯슨 나노/Xavier/NX/TX2 NX와 사용할 수 있는 캐리어 보드로 HDMI2.0, 기가비트 이더넷, USB3.0, M.2 Key E WiFi/Bt, CSI 카메라 포트, RS232, SD 카드, CAN, PIO, I2C, I2S 등의 인터페이스를 지원합니다.
특징
- Compact size (87mm*52mm*26mm) saves precious space
- Lightweight (100g) good for small AI or IoT Application
- Compact & all-in-one design
- Equipped with an anti-fall aviation plug that supports high currents
- Cost-effective, suitable for narrow and small operation environment
- Additional USB 3.0 ZIF connector compared to its original version(A203)
-
Connector
Description
HDMI Port
HDMI Right Angle Vertical Connector
USB 3.0 Type A
2* USB 3.0 Link 1 Type-A Connector
NVIDIA Gigabit Ethernet
RJ45 Gigabit Ethernet Connector (10/100/1000)
DC Power
DC Input Power TE Connector
USB 2.0
USB 2.0 Micro-AB Connector
FAN Connector
Picoblade Header
SD Card
1x MicroSD Card Slot
M.2 Key E
PCI-E 2230 Size
CSI Camera
1x CSI Camera
USB 3.0 ZIF Connector
USB 3.0 0.5mm pitch 20 pin ZIF
RTC Connector
3V, 2 pin
M.2 Key M Disk
Disk size 2242
NVIDIA Jetson Nano/NX/TX2 NX
Nano/NX/TX2 NX 260 PIN Connector
Multifunctional port
2.0 PITCH 40 PIN (such as UART, GPIO, SPI, etc.)
Multifunctional port
2.0 PITCH 14 PIN (Reset, CAN, Recovery, etc.)
-
A203 Version 2 is an updated version of A203. It adds additional pins and one USB 3.0 20-pin ZIF Connector. It is a high-performance, interface rich NVIDIA Jetson Nano / Xavier NX/TX2 NX compatible carrier board, providing HDMI 2.0, Gigabit Ethernet, USB3.0, M.2 key E Wifi / BT, M.2 key M solid-state drive, CSI camera, RS232, SD card, CAN, PIO, I2C, I2S, fan and other rich peripheral interfaces are suitable for environments with strict environmental requirements, small size and powerful functions.
Basically, it works with an NVIDIA module mentioned above to achieve graphic AI applications. To be more specific, with the NVIDIA Jetson Nan/Xavier NX / TX2 NX module assembled, it could support NVIDIA JetPack, which includes a board support package (BSP), Linux OS, NVIDIA CUDA®, cuDNN, and TensorRT™ software libraries for deep learning, computer vision, GPU computing, multimedia processing, and much more. It is suitable for small-size AI graphical applications such as smart-city IoT edge devices, Home robots, UAVs, Unmanned boats and Unmanned submarines which need to have a lightweight, low power consumption and small overall design.
Hardware Overview
Part List
1 x A203 v2 Carrier Board
1 x Power Adapter 90W 19V (power cable not included)
1x Exchange line (XT30 female to DC Power Jack male)
Note
- The carrier board is specially designed for working with Jetson Nano/Xavier NX / TX2 NX modules and we will not include them inside.
- When using Jetson Nano, the M.2 KEY E cannot work but instead, M.2 KEY M could.
- When using Jetson Nano, 'CAN' cannot work.
- If want to burn OS into the module. First, enter the recovery mode, find the 14 pins IO on A203 V2, and connect Pin 3(RECOVERY) to GND with a jumper line.
- We will not include a power cord, please choose a suitable form according to your country.
문서
-
A203 V2 Carrier Board Specification
Please noted that the Jetpack OS could only run in the storage of module (eMMc and module SD card)
- reComputer Jetson™ Series Guide
- Getting Started with Allxon on NVIDIA® Jetson Devices
- Flash JetPack OS to A203 Carrier Board
- NVIDIA Jetson powered devices and carrier boards comparison
-