온도센서 모듈 -EMC1414, 4채널
(THERMO 5 click)
개요
- 본 제품은 EMC1414 온도센서 모듈입니다.
- 기본 0도에서 127도, 최대 -64도에서 191도까지 +/-1도의 정확도로 측정이 가능한 센서입니다.
- 3.3V로 동작할 수 있으며, 타켓 MCU와 I2C 인터페이스로 통신합니다.
- 4개의 온도 채널(3개 외부 다이오드, 1개 내부 다이오드)을 모니터링 할 수 있습니다.
특징
-
THERMO 5 click features
THERMO 5 click can be used to measure temperatures with up to two/three externally connected diodes.
Each external diode channel is configured with Resistance Error Correction and Beta Compensation based on user settings and system requirements.
The device contains programmable High, Low, and Thermo limits for all measured temperature channels.
If the measured temperature goes below the Low limit or above the High limit, the ALERT pin can be asserted (based on user settings).
If the measured temperature meets or exceeds the Thermo Limit, the THERM pin is asserted unconditionally, providing two tiers of temperature detection.
EMC1414 features
The EMC1414 monitors four temperature channels. It provides ±1°C accuracy for both external and internal diode temperatures.
Resistance Error Correction feature automatically eliminates the temperature error caused by series resistance allowing greater flexibility in routing thermal diodes.
Beta Compensation feature eliminates temperature errors caused by low, variable beta transistors common in today's fine geometry processors.
Specifications
Type Temperature,Humidity Applications Personal computers, electronics equipment, industrial controllers On-board modules EMC1414 temperature sensor Key Features ±1°C accuracy, 0.125°C resolution Interface I2C,GPIO Input Voltage 3.3V or 5V Compatibility mikroBUS Click board size S (28.6 x 25.4 mm) Pinout diagram
This table shows how the pinout on THERMO 5 click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
문서
연관제품
- 연관제품 1