스파크펀 ESP32-C6 IoT 씽 플러스 보드
(SparkFun Thing Plus - ESP32-C6)
개요
- 본 제품은 스파크펀 ESP32-C6 IoT 씽 플러스 보드 입니다.
- RISC-V 싱글 코어 ESP32-C6 WROOM-1-N16 칩을 탑재하고 있는 제품으로 2.4Ghz WiFi 6, Bluetooth 5.3, Zigbee, Thread(802.15.4)를 지원합니다.
- 보드 뒷면에 microSD 슬롯을 장착하고 있으며, I2C Qwiic 커넥터를 장착하고 있습니다.
- 리포 배터리 충전회로, 배터리 잔량 측정 회로, addressable LED를 지원하며, ESP32-C6의 GPIO를 보드 양면으로 접근이 가능합니다.
- USB C 커넥터 및 리포 배터리 연결을 위한 JST 커넥터가 장착되어 있습니다.
특징
- ESP32-C6 WROOM-1-N16 Module:
- 32-bit RISC-V Single-Core Microprocessor
- 23 Multifunctional GPIO
- Most peripherals available on any GPIO pin.
- Up to 7 12-bit ADC Channels
- Up to 2 UART Channels (with flow control)
- USB Serial
- One Low Power UART Channel
- One I2C Channel
- One Low Power I2C Channel
- LED PWM
- One I2S Channel
- 16 MB Flash
- 2.4 GHz WiFi 6
- Bluetooth® 5 LE
- Zigbee & Thread (802.15.4)
- PCB Antenna
- Matter-compatible
- Thing Plus Form-Factor:
- Dimensions: 2.55" x 0.9"
- Two Mounting Holes
- 28 PTH pins
- USB-C Connector
- 2-pin JST Connector for LiPo Battery (not included)
- 4-pin Qwiic Connector
- µSD Card Slot
- MCP73831 Battery Charger
- Charge Rate: 213mA@3.3V
- MAX17048 Fuel Gauge
- I2C Address: 0x36
- LEDs:
- PWR - Red Power LED
- CHG - Yellow Battery Charging Indicator
- STAT - WS2812 RGB LED (Tied to IO23)
- Buttons:
- BOOT
- RESET
-
Packed with cutting-edge technology and housed in a compact, user-friendly footprint, the SparkFun ESP32-C6 Thing Plus empowers your wireless creations like never before. At its heart lies the powerful ESP32-C6 WROOM-1-N16 module from Espressif™, boasting a RISC-V single-core processor, more than enough flash memory, and a diverse selection of wireless connectivity options. Dive into the realms of 2.4 GHz WiFi 6, Bluetooth® 5.3, Zigbee and Thread (802.15.4), unlocking a world of possibilities for your projects.
The SparkFun ESP32-C6 Thing Plus is equipped with multiple features that accentuate the boards potential. The microSD card slot lets you expand your project's capabilities, while the Qwiic connector seamlessly integrates the Thing Plus into SparkFun's vast ecosystem of sensors, actuators, and more.
This development board also includes a LiPo battery charger and fuel gauge, an addressable LED, and more. The Thing Plus footprint is Feather-compatible and breaks out all of the ESP32-C6's 23 GPIO pins to 0.1in.-spaced PTH headers. For primary power and programming, the board is also equipped with a USB-C connector and a 2-pin JST connector for a LiPo battery.
The ESP32-C6 includes a wide range of peripheral options including SPI, UART, LPUART, I2C, I2S, LED PWM, USB Serial/JTAG controller, ADC and more. Many of these peripherals can be mapped to any GPIO pin though some are tied to specific pins.
Elevate your wireless projects with the SparkFun ESP32-C6 Thing Plus. Its intuitive design, powerful features, and seamless connectivity await.
문서
- Schematic
- Eagle Files
- Board Dimensions
- Hookup Guide
- Datasheet (ESP32-C6 WROOM-1)
- Technical Reference Manual (ESP32-C6)
- Thing Plus Info Page
- Qwiic Info Page
- GitHub Hardware Repo