베리IMU V3-라즈베리 가속도, 자이로, 지자계, 대기압/고도 센서

(BerryIMU – An accelerometer, gyroscope,

magnetometer and barometric/altitude sensor)

개요

  • BerryIMU는 라즈베리 파이 혹은 아두이노와 사용이 가능한 IMU 센서로 속도, 방향, 중력 등을 측정할 수 있는 센서입니다.
  • 이를 위하여 가속도 센서, 자이로스코프, 지자계 및 BMP388 대기압 센서 및 온도 센서를 하나의 모듈에 통합 탑재한 제품입니다.
  • 본 제품을 이용하여 조금더 쉽게 IMU 센서를 이용하여 보십시오.
  • SparkFun Qwiic 커넥터를 장착하고 있습니다.
  • 3.3V/5V 시스템과 호환됩니다.

특징

  • Gyroscope and accelerometer output rates of 6.7KHz (6,664 times a second!)
  • Detect tilt, tap and double tap
  • Pedometer, step detector and step counter
  • Interrupt pins
  • Read temperature
  • supports both 3.3V and 5V
  • I2C and SPI
  • “Always-on” experience with low power
    consumption for both accelerometer and gyroscope

  • Technical specifications

    Weight =  5gm

    IMU sensors

    Gyroscope  - LSM6DSL

    • i2c and SPI  interface
    • Measurement range ±125/±250/±500/±1000/±2000 dps
    • Sensitivity 4.375, 8.75, 17.50, 35, 70 mdps

    Accelerometer  - LSM6DSL

    • i2c and SPI  interface
    • Scales of ±2g / ±4g /  ±8g / ±16g

    Magnetometer - LIS3MDL

    • i2c and SPI  interface
    • Magnetic field full scale of  ±4 / ±8 / ±12 / ±16 gauss.
    • Internal temperature sensor

    Barometric Sensor BMP388

    • i2c interface
    • Pressure range 300 ... 1250 hPa
    • Resolution of data: Pressure: 0.18 Pa (eqiuv. to <10 cm)
    • Absolute accuracy  ±50 Pa
    • Relative accuracy ± 8Pa (equiv. to ±0.6 m)
    • Temperature range -40  ...+85 °C

     

    BerryIMUv3 comes with;

    • BerryIMUv3 PCB with sensors
    • 1 x male header

    IMUs can be found in devices like, quad copters, smart phones, segways, Wii Remote etc.. and are used to sense movement and orientation.

    Adding BerryIMU  to your  Raspberry Pi, Adruino, teensy  or ESP8266 will open up a whole new world of possibilities.

    BerryIMUv3 is designed to take some of the complexity out of IMUs and to try and make them more enjoyable  to use. BerryIMUv3 includes the latest and greatest sensor ICs.

    3.3V and 5V compatible (We have included logic level shifters for 5V use)

    BerryIMUv3 is compatible will all models of Raspberry Pi, It is also compatible with Arduino, Teensy 3.6,  ESP2866.

    We have also included SparkFun Qwiic connectors for the I2C bus so you don't even need to solder! Just plug in a compatible cable and connect to your MCU.

문서

연관제품