EZO 전기 전도성 측정 모듈

(EZO Conductivity Circuit)

개요

  • 본 제품은 작은 크기지만 강력한 성능을 가지고 있는 전기 전도성 측정 모듈입니다.
  • 일반적인 어떤 K 0.1에서 K10까지 측정가능한 EC probe와 같이 사용이 가능한 제품입니다.
  • K 0.1에서 K 10까지의 값을 EC 프로브에서 읽을 수 있으며, 높은 수준의 정교한 측정 오차를 가집니다.
  • UART 및 I2C 인터페이스를 지원하며, 측정된 값은 ASCII 형태로 출력이 됩니다.
  • 3.3V 및 5V 시스템에서 동작이 가능하며, 아두이노 및 라즈베리 파이 예제가 지원됩니다.

특징

  • Reads
    • Conductivity
    • Total dissolved solids
    • Practical salinity units
    • Specific gravity of sea water
    • E.C. readings +/- 2%
    • Full E.C. range from 0.07 μS/cm to 500,000+ μS/cm
    • Temperature dependent or temperature independent readings
    • Flexible calibration protocol supports single point or
      dual point calibration
    • Calibrate to any E.C. value
    • Data format is ASCII

    Two data protocols
    • UART asynchronous serial connectivity
      (RX/TX voltage swing 0-VCC)
    • I2C (default I2C address 0x64)
    • Operating voltage: 3.3V to 5V
    • Works with any off-the-shelf two conductor conductivity probe
    • Works with any K value from K 0.1 to K 10

    Sleep mode power consumption
    • 0.4mA at 3.3V

    Circuit Specs
    • Dimensions: 13.97mm X 20.16mm (0.55" X0.79")
    • Weight: 1.80 grams

문서

연관제품