EZO 용존 산소량 측정 모듈

(EZO Dissolved Oxygen Circuit)

개요

  • 본 제품은 작은 크기지만 강력한 성능을 가지고 있는 용존산소량 측정 모듈입니다.
  • 최고 수준의 안정성과 정교성을 보여주는 제품으로 0.01 에서 +35.99 mg/L 까지 측정이 가능합니다.
  • 일반적인 용존 산소 센서 프로브(galvanic HDPE dissolved oxygen probe/sensor/electrode)와 같이 사용이 가능한 제품입니다.
  • 용존 산소량을 프로브에서 읽을 수 있으며, 높은 수준의 정교한 측정 오차를 가집니다.
  • UART 및 I2C 인터페이스를 지원하며, 측정된 값은 ASCII 형태로 출력이 됩니다.
  • 3.3V 및 5V 시스템에서 동작이 가능하며, 아두이노 및 라즈베리 파이 예제가 지원됩니다.

특징

  • Reads
    • Full range dissolved oxygen readings from 0.01 to +35.99 mg/L
    • Accurate dissolved oxygen readings down to the 
       hundredths place (+/- 0.2)
    • Temperature compensation
    • Salinity compensation
    • Pressure compensation
    • Flexible calibration protocol supports one point or two calibration
    • Calibration required only once per year with
      an Atlas Scientific™ Dissolved Oxygen probe
    • Single reading or continuous reading modes
    • Data format is ASCII

    Two data protocols 
    • UART asynchronous serial connectivity
    • (RX/TX voltage swing 0-VCC)
    • I2C (default I2C address 0x61)
    • Compatible with any microprocessor that supports UART,
    or I2C protocol
    • Operating voltage: 3.3V to 5V
    • Works with any off-the-shelf galvanic 
    • HDPE dissolved oxygen probe

    Sleep mode power consumption
    • 0.995mA at 3.3V

    Circuit Specs
    • Dimensions: 13.97mm X 20.16mm (0.55" X0.79")
    • Weight: 1.77 grams

문서

연관제품