RTC, 오디오 입력/출력, USB 허브, 블루투스, WiFi, SATA 인터페이스 등을 탑재 지원합니다.
본 확장 쉴드를 이용하여 라즈베리 파이 프로젝트를 쉽고 빠르게 진행할 수 있습니다.
특징
Input Voltage: 6V to 18Vdc converted to 5V, 4A via step-down DC/DC converter to power the Raspberry Pi
SATA: Allows you to connect SATA devices to your Raspberry Pi
Audio:
1> 3.5mm MIC in jack
2> 3.5mm stereo audio jack
3> SPDIF output
4> Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)
Wireless:
1> WiFi (IEEE 802.11b/g/n) with external antenna
2> IR sensor (38KHz)
3> Bluetooth serial communication
USB Storage: Self-powered USB hub with 3 ports
Real-time clock (RTC): Based on DS3231SN with included CR2032 battery
Misc:
1> Power output socket
2> Camera flex slot so camera can still be used with the expansion board attached
3> DIP switch to remove connection from RPi's pin header
4> Directly connected on top of the Raspberry Pi using the board GPIO header pins
5> No wiring nor soldering is required
6> Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
7> Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B Dimensions: 85 x 56mm (Same size as Raspberry Pi)
Note: When you power Raspberry Pi with the shield power resource, please don't power it again via the Micro-USB port, it will damage the board!