1.5인치 지능형 OLED 모듈 uOLED-128-G2

(uOLED-128-G2 1.5 inch Intelligent OLED module

(with Goldelox Processor))

개요

  • 본 uOLED-128-G2 제품은 컴팩트한 크기의 디스플레이 모듈로 첨단 Passive Matrix OLED와 GOLDELOX 그래픽 컨트롤러를 탑재한 제품입니다.
  • 강력한 그래픽, 텍스트, 이미지, 애니메이션 및 셀수 없는 많은 기능이 GOLDELOX 칩에 빌트인되어 있어 별도의 장치 없이 독립적으로 모듈의 동작이 가능합니다.
  • 4DGL-Workshop4 IDE(에디터, 컴파일러, 다운로더)를 통하여 바로 코드를 작성할 수 있으며, 수주 이상의 많은 노가다성 그래픽 작업을 획기적으로 줄여줍니다.
  • 4DGL은 그래픽 지향 언어로 개발자들이 베이직, C, 파스칼과 유사한 문법으로 어플리케이션을 작성할 수 있습니다.
  • 본 제품은 시리얼, 아날로그, 디지털, 버튼, 조이스틱, 소리생성, Dallas 1-Wire등의 I/O를 제공하며,
  • Workshop4 IDE에서 Designer, ViSi, Serial 중 한가지 환경을 사용하여 프로그래밍이 가능합니다.

특징

  • Low-cost OLED display graphics user interface solution.
  • 128 x 128 resolution, 65K true to life colours, PMOLED screen.
  • 1.5" diagonal size, 45.5 x 33.5 x 6.1mm. Active Area: 27mm x 27mm.
  • No back lighting with near 180° viewing angle.
  • Easy 10 pin interface to any external device: VCC, TX, RX, GND, RESET, IO1, IO2, 3.3V.
  • Powered by the 4D-Labs GOLDELOX graphics processor highly optimised for 4DGL, the high level 4D Graphics Language.
  • 2 x GPIO ports supports:
    • Digital I/O
    • A/D converter with 8/10 bit resolution
    • Complex sound generation
    • Dedicated RTTTL tune engine
    • Multi-Switch Joystick
    • Dallas 1-Wire
  • 10K bytes of flash memory for user code storage and 510 bytes of RAM for user variables (255 x 16bit vars).
  • 1 x Asynchronous hardware serial port, TTL interface, with 300 baud to 600K baud.
  • On-board micro-SD memory card adaptor for storing of icons, images, animations, etc. Supports 64Mb to 2Gig micro-SD memory cards. A SPI compatible micro-SD card is required.
  • Comprehensive set of built in high level 4DGL graphics functions and algorithms that can draw lines, circles, text, and much more.
  • Display full colour images, animations, icons and video clips.
  • Supports all available Windows fonts and characters (imported as external fonts).
  • 4.0V to 5.5V range operation (single supply).
  • Module dimensions: 36 x 36 x 13.7mm (including corner plates).
  • Weighing ~10g.
  • Display Viewing Area: 27 x 27mm
  • Back plate with 4 x 3mm holes for mechanical mounting.
  • RoHS Compliant.
  • CE Compliant (Modules with the CE Mark)
  • Viewing Area: 27.0 x 27.0 mm
    Module Width: 36 mm
    Module Height: 36 mm
    Module Depth: 13.7 mm
    Module Weight: ~10 g
  • This item includes the following:
    • uOLED-128-G2 Display Module
    • 150mm 5 way Female-Female jumper cable, for quick connection to another device or breadboard
    • 5 way Male-Male adaptor (for converting the Female-Female cable to be Male-Female)
    • Quick Start User Guide

문서

연관제품