XMEGA Xprotolab 오실로스코프

(XMEGA Xprotolab)

개요

  • 본 XMEGA Xprotolab은 mixed signal 오실로스코프, 로직분석기, arbitrary waveform 생성기로 다른 제품들과는 다르게 DIP 패키지 형태로 되어 있는 제품입니다.
  • 1x16 인치의 크기로 본 제품은 브레드보드에 직접 꼽아 사용이 가능한 제품입니다.
  • 제품상에 있는 그래픽 OLED 매트릭스는 파형, 측정값, 메뉴 시스템을 디스플레이 할 수 있습니다.
  • PC와 연결하여 Gabotronics XScopes software를 사용하여 장치를 제어하고 파형을 볼수 있습니다.
  • 아날로그 디지탈 신호를 동시에 샘플링할수 있을 뿐아니라 여러 고급 트리거 옵션, Lissajous pattern을 plotting하기 위한 XY 모드, 위상차나 V/I curve, 스펙트럼 분석기능, 파형생성 기능을 가지고 있습니다.
  • 보드에는 ATXMEGA32A4U 마이크로컨트롤러가 탑재되어 있습니다.
  • Dimensions: 1.615" x 1.01"

특징

  • ATXMEGA32A4U Development Board
    • ATXMEGA32A4U 36KB Flash, 4KB SRAM, 1KB EEPROM
    • Graphic OLED display 0.96", 128x64 pixels
    • PDI interface
    • 4 tactile switches
    • USB connectivity
  • Logic Analyzer
    • 8 Digital Inputs, 3.3V level
    • Maximum sampling rate: 2MSPS
    • Frequency counter: 12Mhz
    • Protocol Sniffer: UART, I2C, SPI
    • Internal pull up or pull down.
    • Buffer size: 256
  • Mixed Signal Oscilloscope
    • 2 Analog Inputs
    • Maximum Sampling rate: 2MSPS
    • Analog Bandwidth: 200kHz
    • Resolution: 8bits
    • Input Impedance: 1MΩ
    • Buffer size per channel: 256
    • Input Voltage Range: -14V to +20V
  • Arbitrary Waveform Generator
    • 1 Analog Output
    • Maximum conversion rate: 1MSPS
    • Analog Bandwidth: 44.1kHz
    • Resolution: 8bits
    • Output current > +/- 7mA
    • Buffer size: 256
    • Output Voltage: +/- 2V

문서

연관제품