코인셀 배터리 부스트 모듈 -NBM5100A

(BATT BOOST CLICK)

   

개요

  • 본 제품은 코인셀 배터리 부스트 모듈 -NBM5100A입니다.
  • 전력 최적화를 통해 코인셀 배터리의 수명을 늘려주는 NBM5100A 칩을 기반으로 디자인된 제품입니다.
  • 일회용 코인셀 배터리가 저전압, 저전력 어플리케이션에서 사용되고 급격한 전류 사용이 필요할때 전압 강하와 배터리 수명 제한사항을 극복할 수 있게 하여 주는 제품입니다.

특징

  • BATT Boost Click is a compact add-on board that expands a coin battery cell's lifetime and current capability, like the CR2032 and lithium thionyl batteries. This board features the NBM5100A, a coin-cell battery life booster with adaptive power optimization from Nexperia. It is a battery energy management device designed to maximize usable capacity from non-rechargeable, primary batteries when used in low-voltage, low-power applications requiring burst current loads. The devices overcome voltage drop and battery life limitations associated with extracting high pulse currents. This Click board™ makes the perfect solution for the development of battery-powered IoT, industrial applications, consumer and wearable devices, and more.

  • HOW DOES IT WORK?

    BATT Boost Click is based on the NBM5100A, a coin-cell battery life booster with adaptive power optimization from Nexperia. It contains an intelligent learning algorithm and two stages of high-efficiency DC-DC conversion. The first stage, DC-DC conversion, transfers energy from the lithium battery to a capacitive storage element at a low constant current. When charged, a second DC-DC conversion cycle utilizes this stored energy to supply a regulated voltage with high pulse load current capability on the VDH output terminal. The battery is never directly subjected to large load pulse currents, resulting in a longer, more predictable battery lifetime.

    batt boost click inner img

    The NBM5100A has a programmable constant battery load current of 2mA up to 16mA. It also features an ultra-low standby current, integrated fuel gauge, high peak power efficiency, low pulse output current, protection against battery voltage dips, and more. The capacitor balancing IO of the NBM1500A is connected to two supercapacitors and is intended for applications utilizing series-connected supercapacitors requiring voltage balancing. The input supply source of the NBM5100A can be selected from the 3.3V rail of the mikroBUS™ socket or the coin battery itself. The selection can be made over the VBT SEL jumper.

    BATT Boost Click uses a standard 2-wire I2C interface to communicate with the host MCU, supporting a clock frequency of up to 1MHz. The I2C address can be selected over the ADDR SEL jumper. The auto mode utilizes the start pin (ON) for one cycle. There are two ways to define the end of the active state in auto mode: short pulse on the ON pin and long pulse on the ON pin. The NBM1500A will interrupt the host MCU when it is ready over the RDY pin.

    This Click board™ can be operated only with a 3.3V logic voltage level. The board must perform appropriate logic voltage level conversion before using MCUs with different logic levels. Also, it comes equipped with a library containing functions and an example code that can be used as a reference for further development.

    SPECIFICATIONS

    Type Boost
    Applications Can be used for the development of battery-powered IoT, industrial, consumer and wearable devices, and more
    On-board modules NBM5100A - coin-cell battery life booster with adaptive power optimization from Nexperia
    Key Features Coin-cell battery life booster with adaptive power optimization, programmable constant battery load current, protection against battery voltage dips, low ripple regulated programmable output voltage, low standby current, high peak conversion efficiency, integrated fuel gauge, and more
    Interface I2C
    ClickID Yes
    Compatibility mikroBUS™
    Click board size L (57.15 x 25.4 mm)
    Input Voltage 3.3V,External

문서

연관제품