무제 문서




라즈베리 파이5 용 M.2 2242 NVMe 쉴드 -SSD, X1003

(M.2 2242 NVMe Shield for Rpi 5 -X1003)

개요

  • 본 제품은 라즈베리 파이5 용 M.2 2242 NVMe 쉴드 -SSD, X1003 입니다.
  • 라즈베리 파이 5에 SSD 스토리지를 추가하고자 할때 사용이 가능한 제품입니다.
  • PCIe 2.0/3.0 인터페이스를 가지고 있어 최대 8Gbps의 빠른 전송 속도를 지원합니다.

특징

  • Giving your Raspberry Pi 5 speedy data transfer and super-fast boot!

    Introducing the X1003 NVMe SSD shield, the perfect solution for expanding storage capacity and enhancing performance for your Raspberry Pi 5. With its elegant and ultra-compact design, this shield allows you to install the SSD inside the Raspberry Pi official case, providing both protection and a sleek appearance.

    The X1003 supports two M.2 NVMe SSD form factors: 2242 and 2230. Its PCIe 2.0/3.0 interface ensures lightning-fast data transfer speeds of up to 8Gbps, enabling you to transfer large amounts of data within seconds. Additionally, it seamlessly integrates with the Raspberry Pi official passive cooler, minimizing any impact on cooling performance. The inclusion of mounting holes and standoffs provides added protection for your solid-disk drives while effectively dissipating heat. The built-in LED light indicates the current reading or writing status, eliminating any guesswork.

    Whether you're creating a home media center or building a Network-attached storage (NAS) system, the X1003 is the perfect storage solution. It allows you to store and stream your own videos, music, and digital photos within your home or even across the globe. Furthermore, the X1003 supports operating system booting from your SSD, resulting in faster application launches, web serving, and file copying.

  •    Product Features  
     
     

    Compatible With
    - Raspberry Pi 5B

     

    - Ideal PCIe storage solution for Raspberry Pi 5 - M.2 NVMe SSD Shield
    - Install inside the Raspberry Pi official case for a sleek and protected setup
    - Supports high-capacity M.2 NVMe solid-state drives up to 4TB
    - Supports two M.2 NVMe SSD form factors: 2242, 2230
    - Supports PCIe 2.0 5Gbps / PCIe 3.0 8Gbps for speedy data transfer and super-fast boot
    - Features a blue LED indicator that displays power and drive status
    - Equipped with an integrated high-efficiency DC/DC step-down converter, providing up to 3.5A of power for your SSD
    - Powering via both GPIO pin header and FFC, ensuring sufficient power supply without any worries

    - Compatible with the official active cooler with minimal impact on cooling performance

     

    * NVMe SSD Incompatibility list on the bottom of the page

  •     Technical Specification  
     
     
    Power supply : 5Vdc +/-5% power via GPIO pin header and FFC, converted to 3.3V max 3.5A  to power the SSD
    Ports & Connectors : PCIe connector - 16-pin pitch0.5mm
      SSD connector - M.2 KEY-M 67P
    PCIe cable length : 22mm
    PCB Size : 55mm x 54.5mm
  •    Important Notes  
     
     
    - NVMe SSD Incompatibility List
      We recommend refraining from using the following NVMe SSD drives which is equipped with a Phison controller due to their proven incompatibility:

    WD Blue SN550/SN580 series
    WD Green SN350 series
    WD Black SN850 series
    Other NVMe SSD drivers equipped with the same Phison controller

    These specific models have demonstrated compatibility issues, and it is advisable to avoid them when considering NVMe SSD options for the X10xx series NVMe shield. By steering clear of these drives, users can ensure a smoother and more reliable experience with their storage solutions.
    - Compatible with M.2 NVMe SSDs
    - Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices
    - Older NVMe drives with less efficient flash media may not perform as well as newer drives
    - New NVMe SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer.

문서

  • https://wiki.geekworm.com/X1003
  •   Test & Reviews  
     
     

    Test Conditions

    -System board details: Raspberry Pi 5 Model B Rev 1.0 , 4G RAM

    -Interface board details: X1000/X1001/X1002/X1003 NVMe Shield

    -Operation system: Raspberry Pi OS with desktop (Debian12 (bookworm), 32bit, Release date: October 10th 2023)

    -Storage details: Netac N930E-PRO M.2 NVMe 128GB

     

    Testing the SSD speed from command line with dd

    1) To test the write speed, writing 1 GB of data in 10 blocks of 100 MB.

    2) To test the read speed, use dd to read our entire TestingFile file generated from the last command, in 10 blocks of 100 MB each.

     

    Run at PCIe 2.0

     

     

    Run at PCIe 3.0
     

     

    As seen above, the final results with the dd command are:

      -Write speed: 379 MB/s at PCIe 2.0, 603MB/s at PCIe 3.0
    -Read speed: 415 MB/s at PCie 2.0, 781MB/s at PCIe 3.0

     

    Testing disk drive read speed with hdparm

    Run at PCIe 2.0, average read rate: 395.5 MB/s (3 samples)

     

     

    Run at PCIe 3.0, average read rate: 768.3 MB/s (3 samples)

     

연관제품