절연된 제품으로 전원 및 데이터 케이블 대신 이더넷 케이블로 둘 다를 대치할 수 있게 하여주는 제품입니다.
4개의 입력 와이어를 연결하면 정류된 5V 5A 출력을 얻을 수 있습니다.
특징
Compliance with IEEE802.3at standard.
44V~57V wide operating voltage range.
Maximum output power up to 25W; Rated output: 5V/5A.
The output ripple is less than 250 mV.
Conversion efficiency can be as high as 80% (input: 48V output)5V@5A).
Withovercurrent, short circuit, under voltage, surge andother excellent reliability and circuit protection.
size: 62mm*27mm*14mm
Input/Output: isolate 1500Vdc.
High reliability: The design meets the 5 million hour average failure interval.
The module is designed to extract power from conventional Class 5 Ethernet cable twisted pairs and meets the IEEE 802.3at Power-Ethernet (PoE) standard.At the same time, the module allows the power supply category to select "Intermediate Overlap" and "End Overlap" power supply without distinguishing polarity.
Based on the IEEE 802.3at standard, this paper establishes information connection about the connection status, device type, power consumption level of the receiving device PD, and then applies 30W power supply to port compatible devices based on PSE to power the PD through ethernet.
This module DC/DC converter works in a wide input voltage range and low ripple low noise output.The DC/DC converter also has built-in output overload, output short circuit and overtemperature protection, and provides a 1500Vdc (input/output) electrical isolation.
IEEE802.3at standard and runs with Class 4 (30W) power rating by default
