일산화탄소 검출 High/Low 출력 센서 - 0-1000ppm

(Threshold Carbon Monoxide Detection Sensor (0-1000ppm))

개요

  • 본 제품은 일산화탄소 검출 High/Low 출력 센서 - 0-1000ppm입니다.
  • 일산화탄소를 검출할 수 있으며 5-24V 전압으로 동작합니다.
  • 공장에서 설정된 threshold 값 이상의 가스가 검출되면 high 레벨을 출력하며, 그렇지 않으면 low 값을 출력합니다.
  • 알림: threshold 값은 공장에서 미리 설정되어 사용자가 변경이 불가능합니다.

특징

  • Threshold-based detection
  • Wide voltage range, 5-24V
  • High and low-level outputs
  • Indicator light for status observation
  • User-friendly design
  • Power Supply Voltage: 5-24V
  • High level output range: 5-24V（Output high voltage = supply voltage）
  • Load Current: ＜100mA
  • Static Current: ＜10mA
  • Detectable Gas: Carbon Monoxide (CO)
  • Repeatability: ＜2% of the output value
  • Threshold: 20ppm (Factory-fixed threshold, cannot be modified by the user)
  • Maximum Load: 1000ppm
  • Response Time: ＜15s
  • Zero-Point Output: ±2ppm
  • Output Mode: High-level and low-level signals
  • Line sequence: Black line -OUT, Brown line -VCC, Blue line -GND
  • Pressure Range: 1±0.1 standard atmospheric pressure
  • Lifespan: 8 years (in air)
  • Storage Environment: 10°C ~ 30°C
  • Operating Temperature Range: -10°C ~ 50°C
  • Operating Humidity Range: 15% ~ 90% RH
  • Dimensions: L*W*H=30.35*47.4*47.4mm
  • Cable Length: 50cm
  • Housing Material: Black PCV0 flame-retardant material

문서


  • Dimension Diagram of Carbon Monoxide Detection Sensor

    Dimension Diagram of Carbon Monoxide Detection Sensor


    Connection Port Diagram of Carbon Monoxide Detection Sensor

    Connection Port Diagram of Carbon Monoxide Detection Sensor

  • This carbon monoxide gas sensor differs from most gas sensors on the market as it does not provide specific gas concentration data. Instead, it detects whether the surrounding environment exceeds or falls below a fixed threshold. It operates on a wide voltage range of 5-24V, with high and low-level outputs.

    The sensor is equipped with an indicator light for easy observation of its status, making it user-friendly. When the sensor detects a gas concentration above the threshold, it outputs a high-level signal and the indicator light illuminates. Conversely, when the concentration falls below the threshold, it outputs a low-level signal and the indicator light turns off.

    Carbon Monoxide Detection Sensor Overview

    Note: The threshold of this sensor is factory-fixed and cannot be modified by the user. Custom threshold parameters can be set for bulk orders.

    If you need to measure Carbon Monoxide concentration accurately, we recommend the Fermion: MEMS Carbon Monoxide CO Gas Detection Sensor.

연관제품