DRV8434S SPI 스텝 모터 드라이버 -가변저항 전류제한

(DRV8434S SPI Stepper Motor Driver Carrier,

Potentiometer for Max. Current Limit)

 

개요

  • 본 제품은 DRV8434S SPI 스텝 모터 드라이버 -가변저항 전류제한 입니다.
  • TI사의 DRV8434S 마이크로스텝핑 바이폴라 스텝모터 드라이버 칩을 탑재하고 있습니다.
  • 4.5V-48V로 동작하며, 방열판 없이 대략 1.2A를 연속적으로 전달할 수 있씁니다.
  • SPI 인터페이스를 이용하여 전류 제한, 스텝 모드(11 step modes from full-step through 1/256-step), decay mode, stall 검출 설정을 할 수 있습니다.
  • 저전압, 과전류, 과열 보호 기능을 가지고 있으며, 최대 제한 전류는 가변저항으로 조절이 가능한 제품입니다.

특징

  • 4.5 V to 48 V supply voltage range
  • Can deliver up to 1.2 A continuous per phase without additional cooling (2 A peak)
  • Can interface directly with 1.8 V, 3.3 V, and 5 V systems
  • Highly configurable through SPI interface
  • Optional STEP/DIR control pins (stepping can also be controlled through SPI interface alone)
  • Eleven different step resolutions: full-step with 100% current, full-step with 70% current, non-circular 1/2-step, 1/2-step, 1/4-step, 1/8-step, 1/16-step, 1/32-step, 1/64-step, 1/128-step, 1/256-step
  • Eight configurable decay modes, including smart tune dynamic decay and ripple control modes
  • Two current limit control options available, each with two header pin assembly options, making four versions in all:
  • Integrated stall detection
  • Over-temperature thermal shutdown, over-current protection, open load detection, under-voltage lockout, and charge pump over-voltage protection
  • Driver IC integrates spread spectrum clocking of its internal oscillator and charge pump for reduced EMI
  • 4-layer, 2 oz copper PCB for improved heat dissipation
  • Exposed solderable ground pad below the driver IC on the bottom of the PCB

문서

연관제품