PiCAN CAN FD 제로 보드 -1A SMPS, MCP2518FD, MCP2562FD

(PiCAN FD Zero for Raspberry Pi Zero with 1A SMPS)

IMG_0242

개요

  • 본 제품은 PiCAN CAN FD 제로 보드 -1A SMPS, MCP2518FD, MCP2562FD입니다.
  • MCP2518FD CAN 컨트롤러와 MCP2562FD CAN 트랜시버를 기반으로 디자인된 제품으로 라즈베리 파이 제로와 사용 가능하게 제작되었습니다.
  • CAN 버스는 터미널 블럭(CAN_H, CAN_L, 12V)을 통해서 연결 가능하며, 1A SMPS 전원모듈을 장착하고 있어 PiCAN FD 제로보드와 파이 제로에 CAN 버스를 통해 전원을 공급하여 줄 수 있습니다.

특징

  • Microchip MCP2518FD CAN Controller
  • Microchip MCP2562FD CAN transceiver
  • Arbitration Bit Rate up to 1Mbps
  • Data Bit Rate up to 8Mbps
  • CAN FD Controller modes
  • Mixed CAN 2.0B and CANFD mode
  • CAN 2.0B mode
  • Conforms to ISO 11898-1:2015
  • High speed SPI Interface
  • 4 way plug-in terminal for CAN and power
  • 120Ω terminator ready
  • LED indicator (GPIO 22)
  • SocketCAN driver, appears as can0 to application
  • Interrupt RX on GPIO25 or GPIO6
  • Qwiic (I2C) connector for extra sensors
  • 1A SMPS 6v to 20v input range

  • This PiCAN FD Zero board provide CAN-Bus FD capability for the Raspberry Pi Zero. It uses the Microchip MCP2518FD CAN controller with MCP2562FD CAN transceiver. Connection are made via 4way plug in terminal. CAN_H, CAN_L and +12v supply for the board and the Pi Zero. On board is a 1A SMPS which supplies power to the PiCAN FD and Pi Zero board.

    The improved CAN FD extends the length of the data section to up to 64 bytes per frame and a data rate of up to 8 Mbps.

    Pi Zero, sensor board and cable not included.

문서

연관제품