아두캠 4x8MP 쿼드라스코픽 카메라 모듈 키트 -IMX219

(Arducam 8MP*4 Quadrascopic Camera Bundle Kit

-4 x IMX219, Camarray Camera HAT)

IMG_0242

개요

  • 본 제품은 아두캠 4x8MP 쿼드라스코픽 카메라 모듈 키트 -IMX219 입니다.
  • 8MP IMX219 카메라 모듈 4개와 Camarray HAT 보드가 포함된 제품입니다.
  • 4개의 MIPI 카메라를 하나의 프레임(각각 1/4 해상도)에 결합할 수 있는 제품입니다.
  • 라즈베리 파이 및 젯슨 보드와 사용이 가능합니다.

특징

  • Feature

    • Designed for Raspberry Pi Camera: This Quad- Camera kit allows you to connect four 8MP IMX219 raspberry pi cameras to a single standard pi board and capture images or video at the same time.
    • Four in One: Combine four cameras into one frame, each with a resolution of 1/4; the maximum output you can get: 3280 x 2464 for still images and 1920x1080 for video. Please note the frame rate for video and still images will drop to half the frame rate you would normally get with a single camera
    • Wide compatibility: It is compatible with the latest Raspberry Pi camera software (libcamera) and uses the official Pi camera tuning algorithm. It also supports multi-platform multi-camera solutions such as Raspberry Pi, Jetson Nano, Xavier NX, and many more.
    • Applications: Multiple camera processing technologies have enabled VR (Virtual Reality), AR(Augmented Reality), and other applications like SLAM (Simultaneous Localization and Mapping). Synchronized video streams with Raspberry Pi could be used for many use-cases (e.g., stitching, 3D sensing, tracking, …) before investing in an expensive video multiplexer hardware.

     

    Specifications

    Support Platform Raspberry Pi/Nvidia Jetson
    Output/CSI-2 Speed x1 CSI-2 2-lane Output Port/1.0 Gbps/Lane
    Output Format RAW8/RAW10
    ISP Support Supported on Raspberry Pi
    External Trigger Not Support
    Aggregate mode 1/4 Spelling Combine
    Frame Rate 8MP@21fps, 1080p@30fps, 720p@120fps
    Image Sensor Sony IMX219
    Pixel Size 1.12 μm x 1.12 μm
    Active Array Size 3280 x 2464
    Optical Format 1/4"
    Camera Interface 2-lane MIPI CSI-2
    IR Sensitive Integral IR Cut filter, Visible Light Only
    Camera Board Size 24mm x 25mm
    Camarray Hat Size 65mm x 56 mm
    Default Lens Mount Stock Lens
    Effective Focal Length 3.04mm
    FOV on 1/4" RPi Camera 62.2° (H), 48.8(V)

     

    Package Including

    • 4 × IMX219 Camera Module
    • 1 × Arducam Camarray HAT
    • 4 × 15cm 15-22pin Camera FPC Cable
    • 1 × 30cm 15-22pin Camera FPC Cable
    • 1 × 7cm 15-22pin Camera FPC Cable
    • 1 × Screw Pack

     

    Note

    1. The four-channel camera adopts the 2×2 synthesis method. The images of cameras 0 and 1 are completely synchronized, the images of cameras 2 and 3 are completely synchronized, and the images of cameras 2/3 are one frame behind the images of cameras 0/1.

    2. The resolution of the synthesized image remains unchanged, but the frame rate is halved.

    3. If any camera fails, the composite image can still be output, with the corresponding area of the failed camera being black.

    4. Official Commands and ISP are supported.

    5. The four-channel camera is a customized model, requiring HAT to provide a clock. It cannot be removed and is directly connected to the Raspberry Pi.

    6. The driver of the kit is mainly developed based on the Raspberry Pi/ Nvidia Jeston official board, and there is no guarantee that the third-party board can be used (Due to the different allocation of hardware resources, it may not be compatible)

    7. This camera kit supports the latest Raspberry Pi OS Bullseye (Jan 28th, 2022 and later) and libcamera apps, for the previous Raspberry Pi OS (Legacy) users, contact sales@arducam.com for support.

  • Four in One: Combine four cameras into one frame, each with a resolution of 1/4
  • Wide Compatibility: Supports Raspberry Pi, Jetson Nano, Xavier NX and more
  • Native to Raspberry Pi and Jetson: No need to install additional driver
  • More Applications: Could be used for many use-cases (e.g., stitching, 3D sensing, tracking, …)

문서

연관제품