아두캠 64MP 오토포커스 쿼드 카메라 키트 -라즈베리

(Arducam 64MP Auto focus Quad-Camera Kit for Raspberry Pi)

IMG_0242

개요

  • 본 제품은 아두캠 64MP 오토포커스 쿼드 카메라 키트 입니다.
  • 라즈베리 파이와 사용이 가능한 제품으로 동시에 4개 채널의 카메라 모듈에서 이미지를 캡쳐하고 비디오를 캡쳐할 수 있게 설정되어 있습니다.

특징

  • Multiplexing with ultra high res: 4 x 64mp cameras on 1 Pi.
  • Synchronized: up to 4 cameras capturing at the same time.
  • Autofocus: AF/Manual/Continuous-AF out of the box.
  • Better Control: single/dual/quad channel modes.
  • Highly Compatible: libcamera-ready, works well with most Pi models.

  • Supported Modes

    Single Channel (no sync):
    4 cameras work consecutively where one camera captures after the other. Full-res for each.

    Dual-Channel (synced):
    2 cameras merged into 1 full-res frame, working synchronously. 1/2 res for each.

    Quad-Channel (synced):
    4 cameras merged into 1 full-res frame, working synchronously. 1/4 res for each.

     

    Demo

    Other Camera-Multiplexing Solutions >

     

    Specifications

    arducam pi hawk eye specification f

     

    Packing Including

    • 4 ×64MP Camera Module
    • 1 ×UC-512 Camarray HAT
    • 4 ×30cm 15-22pin Camera Cable
    • 1 ×7cm 15-22pin Camera Cable
    • 1 ×Screw Pack

문서

  • PDF – Getting Started with 64MP-AF Quad Camera Kit
  • Depth Mapping on Arducam Stereo Camera HAT with OpenCV

  • Note

    • Raspberry Pi and tripod are not included.
    • The 64MP cameras in the kit are exclusively made and can only be used with the Camarray HAT. Connecting any of them directly to Raspberry Pi will not work.
    • The arducam 64MP cameras can only get maximum resolution and video streaming on Pi4 and CM4 platforms. The resolution and video streaming of the camera will be limited on other Raspberry Pi platforms.

    using note

    1. The four-channel camera adopts the 2×2 synthesis method. The images of cameras 0 and 1 are completely synchronized, the images of cameras 2 and 3 are completely synchronized, and the images of cameras 2/3 are one frame behind the images of cameras 0/1.

    2. The resolution of the synthesized image remains unchanged, but the frame rate is halved.

    3. If any camera fails, the composite image can still be output, with the corresponding area of the failed camera being black.

    4. Official Commands and ISP are supported.

    5. The four-channel camera is a customized model, requiring HAT to provide a clock. It cannot be removed and is directly connected to the Raspberry Pi.

    6. The driver of the kit is mainly developed based on the Raspberry Pi/ Nvidia Jeston official board, and there is no guarantee that the third-party board can be used (Due to the different allocation of hardware resources, it may not be compatible)

    7. This camera kit supports the latest Raspberry Pi OS Bullseye (Jan 28th, 2022 and later) and libcamera apps, for the previous Raspberry Pi OS (Legacy) users, contact sales@arducam.com for support.

     

    FAQS

    • For dual/quad-channel mode, does the kit still use the full sensor as input?
           - When it's in sync/4-channel mode, it uses ¼ the pixels of each sensor as input. When you switch to single-channel mode, you can get 4 images at full res!
     
    • For single channel mode, what frame rate can I get and how fast can I capture and switch between cameras?
          - You can get roughly ~8 frames (full res) per second with single-channel mode, and the HAT we designed has the ability to switch to the next camera after each frame, so in theory, you can switch between cameras every ~125 ms (⅛ s), but, and it's a huge but, it also depends on how fast you can store that full res image, whether you want the HAT to switch to the next camera after a frame's captured or stored, which Raspberry Pi model you use, etc.
     
    • Can this work with your cable extension kit?
           - Yes.

연관제품