TPS62869 DC-DC 스텝다운 모듈 -I2C, 0.8V-3.35V

(BUCK 22 CLICK)

IMG_0242

개요

  • 본 제품은 TPS62869 DC-DC 스텝다운 모듈 -I2C, 0.8V-3.35V입니다.
  • I2C 인터페이스를 가진 TPS62869 스텝다운 컨버터를 기반으로 디자인된 제품입니다.
  • 입력전압은 2.4V - 5.5V, 출력 전압은 0.8V-3.35V 이며 10mV의 스텝사이즈를 가지고 있습니다.
  • 솔더점퍼에 따라 3.3V/5V 시스템과 사용이 가능합니다.

특징

  • Buck 22 Click is based on the TPS62869, a synchronous step-down converter with an I2C interface from Texas Instruments. The TPS62869 base its work on the DCS-Control™ topology and operates in PWM (pulse width modulation) mode for medium to heavy load conditions and Power Save Mode at light load currents. In PWM mode, the converter operates with its nominal switching frequency of 2.4MHz, having a controlled frequency variation over the input voltage range from the VIN terminal from 2.4 up to 5.5V. Because DCS-Control™ supports both operation modes (PWM and PFM selectable through a serial interface) within a single building block, the transition from PWM mode to Power Save Mode is seamless and without effects on the output voltage, providing an efficient, adaptive, and high power-density solution.

    Buck 22 click inner

    With its DCS-Control™ architecture, excellent load transient performance and tight output voltage accuracy are achieved alongside adjustable output voltage and current ranges from 0.8V to 3.35V and up to 6A on the VOUT terminal with a 10mV step size. As the load current decreases, the TPS62869 enters Power Save Mode operation, which occurs when the inductor current becomes discontinuous, reaching 0A during a switching cycle. In Power Save Mode, the output voltage rises slightly above the nominal output voltage.

    This Click board™ communicates with MCU using the standard I2C 2-Wire interface to read data and configure settings, supporting a Fast Mode operation up to 400kHz. Besides, it also possesses the power-good function, routed to the red LED marked as PWR and INT pin of the mikroBUS™ socket, indicating that the output reached regulation.

    This Click board™ can operate with both 3.3V and 5V logic voltage levels selected via the VCC SEL jumper. This way, it is allowed for both 3.3V and 5V capable MCUs to use the communication lines properly. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.

    SPECIFICATIONS

    Type Buck
    Applications Can be used to derive the required input voltage from a higher voltage source for FPGAs, ASICs, video chipsets, solid-state drives, and more
    On-board modules TPS62869 - synchronous step-down converter with an I2C interface from Texas Instruments
    Key Features DCS-Control topology for fast transient response, adjustable output voltage, 1% output voltage accuracy, 2.4MHz switching frequency, I2C interface, Power-Save Mode, Power-Good indicator, and more
    Interface I2C
    Compatibility mikroBUS
    Click board size M (42.9 x 25.4 mm)
    Input Voltage 3.3V or 5V,External

문서

연관제품