360도 회전 로터리 인코더 모듈
(Gravity: 360 Degree Rotary Encoder Module)
개요
- 본 제품은 360도 회전 로터리 인코더 모듈 입니다.
- 한 회전에 20 펄스를 출력하는 360도 로터리 인코더입니다.
- 각 펄스에 맞는 LED가 장착되어 있어 시각적인 피드백을 얻을 수 있습니다.
특징
- Operating Voltage: 3.3V~5V
- Total Rotating Angle: 360°
- Pulses Per Revolution: 20
- Interface: two Gravity connectors; I2C
- Cascadable Device Number: 4
- Rotation Lifespan: 30000±200 Cycles
- Contact Resistance: ≤100mΩ
- Insulation Impedance: 100MΩ above
- Oscillation: ＜10ms press
- Operating Temperature: -30℃~+80℃
- Accuracy: 1~51
- Minimum Settable Value: 1(Light up one LED when rotating 2.5 turns)
- Maximum Settable Value: 51(Light up one LED when rotating 1 detent)
- Storage: 0~1023
- Dimension: 37*37mm/1.46*1.46"
-
SHIPPING LIST
- Gravity: Rotary Encoder Module x1
- Gravity I2C/UART Sensor Connector x1
-
This looks like a potentiometer, but it's an encoder switch.
It is a cascadable 360 ° rotary encoder switch with 20 pulses per revolution, and each pulse corresponds to a detent. There are LED lights set for each detent to allow users visually check the real-time status of the encoder.
For ease of use, the module is designed with I2C data output and configurable accuracy within 1~51 for every detent (set in the program). For instance, when it is set to 1, turn on one LED light by rotating 2.5 revolutions; when set to 51, then one LED light can be switched on by rotating one detent.
In order to apply to more scenarios, the encoder is equipped with cascade function that enables to control multiple output devices by occupying only one I2C interface, such as, simultaneously controlling light brightness, color, volume, speed, etc.
Use Case Diagram (Control RGB LED by three encoders)
