컬러 센서 모듈 -CLS-16D24-44-DF8/TR8

(COLOR 15 CLICK)

개요

  • 본 제품은 컬러 센서 모듈 -CLS-16D24-44-DF8/TR8 입니다.
  • CLS-16D24-44-DF8/TR8 센서 칩을 기반으로 디자인된 제품입니다.
  • I2C로 설정가능한 센서로 R/G/B/W/IR을 센싱할 수 있습니다.
  • 내장된 ADC는 인공적인 조명의 50Hz 및 60Hz 깜빡임을 reject합니다.

특징

  • HOW DOES IT WORK?

    Color 15 Click as its foundation uses the CLS-16D24-44-DF8/TR8, a digital I2C compatible interface color light sensor from Everlight Electronics. It supports parallel output for Red, Green, Blue, White and Infrared light (R, G, B, W, IR) and converts them to a 16-bit digital value (0-65535). This sensor is characterized by high resolution designed to reject IR in light sources allowing the device to operate in environments from sunlight to dark rooms, with a maximum detection lux of 204.679lux. Besides, an integrated ADC rejects 50Hz and 60Hz flickers caused by artificial light sources. It also has stable performance over a wide temperature range of -40°C to 65°C, suitable for measuring the present color light.

    Color 15 clickinner

    The CLS-16D24-44-DF8/TR8 does not require a specific Power-Up sequence but requires a voltage of 1.8V for its interface and logic part to work correctly. Therefore, a small regulating LDO is used, the MAX8511, providing a 1.8V out of both 5V and 3.3V mikroBUS™ power rails.

    Color 15 Click communicates with MCU using the standard I2C 2-Wire interface with a maximum clock frequency of 400kHz, fully adjustable through software registers. Since the sensor for operation requires a power supply of 3.3V, this Click board™ also features the PCA9306 and SN74LVC1T45 voltage-level translators. The I2C interface bus lines are routed to the voltage-level translators allowing this Click board™ to work with both 3.3V and 5V MCUs properly. Also, it uses an interrupt pin, the INT pin of the mikroBUS™ socket, used when an interrupt occurs to alert the system when the color result crosses upper or lower threshold settings.

    This Click board™ can operate with both 3.3V and 5V logic voltage levels selected via the VCC SEL jumper. This way, it is allowed for both 3.3V and 5V capable MCUs to use the communication lines properly. However, the Click board™ comes equipped with a library that contains easy-to-use functions and an example code that can be used, as a reference, for further development.

    SPECIFICATIONS

    Type Color Sensing,Optical
    Applications Can be used for automatic residential and commercial lighting management, contrast enhancement, detection of ambient for backlight control, and more
    On-board modules CLS-16D24-44-DF8/TR8 - color light sensor from Everlight Electronics
    Key Features Low power consumption, parallel output for red, green, blue, white and infrared, high resolution and sensitivity, works well under different light source conditions, programmable interrupt, and more
    Interface I2C
    Compatibility mikroBUS
    Click board size S (28.6 x 25.4 mm)
    Input Voltage 3.3V or 5V

문서

연관제품