J-Link Mini V9 JTAG/SWD 디버거 -USB C 타입

(J-Link Mini V9 JTAG/SWD Debugger -USB Type C)

개요

  • 본 제품은 J-Link Mini V9 JTAG/SWD 디버거 -USB C 타입입니다.
  • J-Link V9 디버거를 최소화한 형태의 제품입니다.
  • Keil5 환경에서 최대 다운로드 속도는 12Mhz 입니다.
  • 알림: 위 사진중 USB Type C 커넥터를 가진 제품이 출고됩니다.

특징

  • 1. The simulator supports SWD mode, not JTAG mode. In SWD mode, the maximum download speed is 12000kHz, that is 12MHz (Keil 5 environment). 

    2. With serial port debugging function, the maximum baud rate is 230400. 

    3. With RST reset pin, in fact, RST is not needed in most cases, just DIO, CLK and GND. 

    4, the USB interface with anti-static chip, no longer worry about plug and pull instant static electricity. 

    5. The 3.3v LDO adopts large volume ams1117-3.3, which can effectively provide 500mA current without ironing. 

    6. Interface sequence:  

    Top row: 3.3v, DIO, CLK, GND, RST 

    Lower row: 3.3v, TX, RX, GND, 5V 

    7, with transparent heat shrinkable tube, to prevent damage to the circuit board. 

    8, each emulator has a different serial number, a computer can be inserted into more than one emulator without conflict. 

    9. Support online automatic upgrade, which has been upgraded to the firmware of December 13, 2019. 

    10. Support the latest drivers. 

    11. This product is a mini simplified version of Jlink V9, which is mainly a small size, easy to carry, diversified interfaces, business trip debugging or firmware update artifact.

문서

  • http://www.segger.com/download_jlink.html

  • After installing the driver and connecting to the target board, you can see the following information under commander:

     

    The setup interface of Keil 5 software is as follows:

     

연관 제품