그루브 산소 센서 Pro-GGC2330 (선보정)
(Grove Oxygen Sensor Pro-GGC2330 (Pre-calibration))
개요
- 본 제품은 그루브 산소 센서 Pro-GGC2330 (선보정)입니다.
- 내장된 온도센서와 MCU에 미리 선보정된 산소 센서로 UART 및 아날로그 전압 출력을 가지고 있습니다.
- 5V 시스템과 사용이 가능합니다.
특징
- Pre-calibration(With build-in MCU and temperature sensor)
- High sensitivity and Accuracy to toxic gas
- Long life, low power consumption
- Good stability
- UART and analog voltage signal output
-
Item Parameter Target Gas O2 Resolution 0.1%VOL Measurement Range 0-25%VOL ReOperating Voltage DC 5±0.1V DC Operating Current < 10 mA Output Output UART(TTL electrical Level, 3V)Analog voltage(refer to table 2 for sensor original amplifying signal) Operating Conditions -20~25℃/15~90%RH(no condensation) Storage Conditions -20~50℃/15~90%RH(no condensation) Size ø23.5mm*24.5mm Life Expectancy 2 years(in the air) -
- Attention to the module should avoid contact with organic solvents (including silica gel and other adhesives), paints, chemicals, oils, and high concentration gases.
- The module must not be subjected to excessive impact or vibration
- The module should be preheated for more than 5 minutes for the first time, and it is recommended to preheat for more than 24 hours if the module is not used for a long time.
- Do not install the module in a strong air convection environment.
- Do not place the mold in a high concentration of organic gas for a long time.