Dual H-bridge motor drive, you can drive two DC motors or a four-wire two-phase stepper motor;
Module supply voltage 2V-10V;
Signal input voltage 1.8-7V;
Single - channel operating current of 1.5A, the peak current up to 2.5A, low standby current (less than 0.1uA);
Built-in anti-co-state conduction circuit, the input is vacant, the motor will not malfunction;
Built-in thermal protection circuit with hysteresis (TSD), no need to worry about the motor stall;
Product size: 24.7 * 21 * 5mm (LWH), ultra-small size, suitable for assembly and automotive;
Mounting hole diameter: 2 mm.
INx connected to the microcontroller IO or other signal source, MOTOR-A and MOTOR-B terminating motor
(L298N internal transistor switch, low efficiency, high heat, to be heat, bulky, very easy to burn on the market L298N, are not using the original chip, the product can be a perfect alternative.
Dual 1.5A * 2, the peak current to 2.5A, built-in thermal protection circuit, do not be afraid of the motor stall burned out, the temperature dropped automatically restored. (Currently on the market of intelligent car voltage and current are in this range)
Small size, light weight, 0 standby current, is the ideal model for your car
Precautions:
Positive and negative power supply reversed will certainly cause circuit damage.
Output short circuit to the ground or output short circuit, and the motor stall case, the chip will be thermal protection, but close to or exceed 10V voltage and peak current of more than 2.5A cases will also cause the chip burned.
