라즈베리 파이 4B/3B+용 PoE HAT 보드

(Power-Over-Ethernet (PoE) HAT for Raspberry Pi 4B/3B+)

개요

  • 본 제품은 라즈베리 파이 4B/3B+용 PoE HAT 보드입니다.
  • 이더넷 포트를 통해 라즈베리파이에 전원을 공급할 수 있는 PoE 기능을 지원합니다.
  • IEEE 802.3af 및 802.3at PoE 표준을 지원합니다.
  • 전원어답터로 전원을 공급하기 힘든 경우 유용한 옵션입니다.

특징

  • Easy to assemble
  • Compatible With: Raspberry Pi 4 Model B / Raspberry Pi 3 Model B+
  • Built-in Cooling Fan
  • Support IEEE 802.3af or 802.3at PoE standard
  • Input: IEEE 802.3af Compliant PoE
  • Output: 5V +-5% up to 2.5A*
  • Protection Circuitry: Transient Overvoltage, Undervoltage Lockout, Thermal Shutdown, Foldback Current Limiting
  • Active airflow and adequate cooling required for stable continuous operation at high load.
  • Weight: 30g
  • Part List
    • 1 x Power-Over-Ethernet(PoE) Hat with 3007 Cooling Fan
    • 3 x M2.5*9+6 Copper Stick
    • 3 x M2.5 Screws
    • 3 x M2.5 Nuts
    • 1 x Aluminum Heat Sink
    • 1 x Screw Drive
  • attention icon

    Attention

    PoE power output must be within the budget of the switch when powering multiple boards!!! STANDARDS COMPLIANT POWER OVER ETHERNET SWITCH REQUIRED!!!
    The network switch or power sourcing equipment (PSE) must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads.
    "Passive PoE" (DC 24V or 48V) is not standards compliant and may cause damage to equipment.
    Do not use this product in an enclosed case without active air circulation!!

문서

  • there is a "handshake" between PSE(Power Source Equipment) and PD(Powered Devices) and the PD will not apply the power supply if the supplied voltage is not matched. It is quite safe for your Raspberry Pi.

    The Hat is perfectly compatible with Raspberry Pi 4B and available for Raspberry Pi 3B+. The way to assemble the HAT on Raspberry Pi Hat is easy as well, you can view the procedure here.

연관 제품