라즈베리 파이 Compute 모듈 IO 보드 -POE

(Raspberry Pi Compute Module IO Board with PoE Feature,

for Raspberry Pi CM3 / CM3L / CM3+ / CM3+L)

개요

  • 본 제품은 라즈베리 파이 Compute 모듈 IO 보드 -POE입니다.
  • Compute 모듈을 꼽아 사용할 수 있게 디자인되어 있는 제품으로 보드상의 다양한 주변기기를 사용할 수 있으며, POE를 지원합니다.

특징

  • Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs
  • 10/100M auto-negotiation Ethernet port, with PoE, enabled
  • 4x USB ports allow connecting more USB devices
  • 2x CSI camera interfaces
  • Onboard HDMI / DSI interfaces for connecting displays
  • Onboard USB TO UART, for serial debugging
  • Cooling fan interface, autorun on power-up OR controlled by IO pins
  • Adopts isolated SMPS (Switching Mode Power Supply)
  • Power supply: micro USB port / PoE Ethernet port
  • PoE power input: 37V ~ 57V DC-in
  • PoE power output: 5V 2.5A DC out
  • Network standard: 802.3af PoE standard
  • Dimensions: 114mm × 84.4mm
  • Mounting hole size: 3.2mm
  • What's on Board

    Hardware Overview

    1. Compute Module interface: for connecting Compute Module (CM3 / CM3L / CM3+ / CM3+L)
    2. Raspberry Pi GPIO header: for connecting Raspberry Pi HATs
    3. PoE enabled Ethernet port: 10/100M auto-negotiation, for connecting router or switch with PoE function
    4. DSI interface: display ports, for connecting Raspberry Pi LCD
    5. USB ports: 4x USB ports, for connecting USB devices
    6. CSI interface: 2x CSI camera ports, for connecting Raspberry Pi Camera
    7. HDMI port
    8. USB TO UART interface: for serial debugging
    9. USB SLAVE interface: allows you to burn system image into Compute Module 3/3+
    10. Power port: 5V 2.5A
    11. TF card slot (bottom side): insert a Micro SD card with the pre-burnt system, to start up Compute Module 3/3+ Lite variant
    12. Cooling fan interface
    13. LAN9514 (bottom side): fully-integrated USB hub and 10/100M Ethernet controller
    14. Si3404 PoE power management chip (bottom side)
    15. CP2102 USB TO UART converter
    16. EP13 PoE power transformer
    17. Optical isolator
    18. Two LED indicators:
    19. Red: Raspberry Pi power indicator
    20. Green: Raspberry Pi operating status indicator
    21. NET network indicator
    22. VGx power config jumper: config the I/O level
    23. UART output config:
    24. Left: connect the CP2102 serial port and Raspberry Pi serial port
    25. Right: disconnect the CP2102 serial port and Raspberry Pi serial port
    26. Cooling fan config:
    27. P34: the fan is program-controlled via P34 pin
    28. EN: the fan is directly powered from 5V power supply
    29. PoE config:
    30. DIS: disable PoE
    31. EN: enable PoE
    32. PoE power voltage measuring pads

문서

연관 제품