미니 스텝 모터 -200스텝, 20x30mm NEMA-8 크기

(Mini Stepper Motor - 200 Steps - 20x30mm NEMA-8 Size)

개요

  • 본 제품은 미니 스텝 모터입니다.
  • 200스텝, 20x30mm NEMA-8 크기의 제품으로 컴팩트한 CNC를 만들때 많이 사용합니다.
  • 4선 바이폴라 스텝모터로 스텝당 1.8도를 회전하며 좋은 holding torque를 가지고 있습니다.
  • 600mA의 최대 소비전류를 가지고 있어 대부분의 모터 컨트롤러에서 쉽게 동작이 가능합니다.
  • 3.9V 동작 전압을 가지고 있습니다.

특징

  • Specs:

    • Bipolar stepper, requires 2 full H-bridges!
    • 4-wire, approx ~16" leads
    • 33mm x  20mm rectangle body
    • 4mm diameter drive shaft, ~9mm long
    • 3.9V rated voltage (you can drive it at a lower voltage, but the torque will drop) at 600mA max current
    • 28 oz*in, 20 N*cm, 2 Kg*cm holding torque per phase
    • 35 ohms per winding

문서

  • Diagram
  • It's rated for 3.9V, if you have a stepper driver with current limiting, use that to keep the power down. If you have a non-current-limiting driver such as the motor shield/hat/feather we found 5V DC power worked well to power the stepper controller.
  • The cable has ready-to-go wires - the drive-shaft does not have a D cut in it, but you can clamp to it pretty easily. We drove it with an Adafruit motor shield for Arduino and it hummed along nicely at 50 RPM. To connect to our shield/hat/featherwing, put the wires in this order: Black, Red, skip ground if there is one, Green, Yellow

연관 제품