피더 M0 WiFi 모듈 - ATSAMD21 + ATWINC1500

(Assembled Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500)

본 제품은 아두이노와 WiFi 기능을 하나의 보드로 합칩 피더 M0 WiFi 보드입니다.
ATSAMD21 마이크로컨트롤러, ATWINC1500 WiFi 칩, USB, 배터리 충전 회로를 탑재하고 있습니다.
802.11bgn WiFi 네트워크에 접속할 수 있으며, Soft AP, SSL TSL 1.2, WEP, WPA, WPA2를 지원하며, 안정적인 성능을 보여줍니다.
헤더가 납땜되어 있습니다.

Here's some handy specs! Like all Feather M0's you get:
- Measures 2.1" x 0.9" x 0.3" (53.65mm x 23mm x 8mm) without headers soldered in. Note it is 0.1" longer than most Feathers
- Light as a (large?) feather - 6.1 grams
- ATSAMD21G18 @ 48MHz with 3.3V logic/power
- 256KB FLASH, 32KB SRAM, No EEPROM
- 3.3V regulator (AP2112K-3.3) with 600mA peak current output, WiFi can draw 300mA peak during xmit
- USB native support, comes with USB bootloader and serial port debugging
- You also get tons of pins - 20 GPIO pins
- Hardware Serial, hardware I2C, hardware SPI support
- 8 x PWM pins
- 10 x analog inputs
- 1 x analog output
- Built in 200mA lipoly charger with charging status indicator LED
- Pin #13 red LED for general purpose blinking
- Power/enable pin
- 4 mounting holes
- Reset button