LSM303D 6자유도 모션 센서

(LSM303D 6DoF Motion Sensor Breakout)

개요

  • 본 제품은 6자유도 LSM303D 모션 센서입니다.
  • 3축 가속도계와 3축 자기 센서 모듈이 결합된 제품입니다.
  • 라즈베리 파이 및 아두이노와 사용이 가능합니다.
  • I2C 인터페이스를 가지고 있으며, 3.3V/5V 시스템과 사용이 가능합니다.

특징

  • LSM303D 6DoF Motion Sensor
  • ±2/±4/±8/±12 gauss magnetic scale
  • ±2/±4/±6/±8/±16 g linear acceleration
  • 16 bit data output
  • 3.3V or 5V compatible
  • I2C interface, with address select via ADDR cuttable trace (0x1D or 0x1E)
  • Reverse polarity protection
  • Raspberry Pi-compatible pinout (pins 1, 3, 5, 7, 9)
  • Compatible with Raspberry Pi 3B+, 3, 2, B+, A+, Zero, and Zero W
  • Python library
  • Datasheet
  • It's also compatible with our fancy new Breakout Garden, where using breakouts is as easy as just popping it into one of the six slots and starting to grow your project, create, and code.

문서

  • Software

    We've put together a Python library that you can use to read data from your LSM303D 6DoF Breakout, and an easy one-line installer to install everything.

    Our software does not support Raspbian Wheezy.

    Notes

    • The trace between the solder pads (marked ADDR) can be cut (carefully with a craft knife) to change the I2C address from the default of 0x1D to 0x1E, meaning that you can use up to two sensors on the same Raspberry Pi or Arduino. If cut, the pads can be bridged again by soldering to reset the address to 0x1D.
    • Dimensions: 19x19x3mm

연관제품