BMP280 대기압/고도/온도 센서 모듈

(BMP280 Breakout - Temperature, Pressure, Altitude Sensor)

개요

  • 본 제품은 BMP280 대기압/온도 센서 모듈입니다.
  • 정교하게 측정(±1 hPa, ±1.0°C, ±1 metre)이 가능하며, 라즈베리나 아두이노와 사용이 가능합니다.

특징

  • Bosch BMP280 temperature, pressure, altitude sensor
  • I2C interface, with address select via ADDR cuttable trace (0x76 or 0x77)
  • 3.3V or 5V compatible
  • Reverse polarity protection
  • Raspberry Pi-compatible pinout (pins 1, 3, 5, 7, 9)
  • Compatible with Raspberry Pi 3B+, 3, 2, B+, A+, Zero, and Zero W
  • Python library
  • Datasheet
  • We've designed this breakout board so that you can solder on the piece of right angle female header and pop it straight onto the bottom left 5 pins on your Raspberry Pi's GPIO header (pins 1, 3, 5, 6, 9). The right angle header also has the advantage of positioning the breakout away from the Pi's CPU so as to minimise radiated heat.

문서

  • Software

    Our Python library for the BMP280 makes it simple to take readings from the sensor, and to combine with code for our other Breakout Garden breakouts and even other HATs and pHATs on a pHAT Stack.

    Our software does not support Raspbian Wheezy.

    Notes

    • The solder pads (marked ADDR) can be bridged to change the I2C address from the default of 0x76 to 0x77, meaning that you can use up to two sensors on the same Raspberry Pi or Arduino
    • The BME680 and BMP280 breakouts both share the same I2C addresses, so if you're using both together then you'll need to change the I2C address on one of them using the solder bridge/pads
    • Dimensions: 19x19x2.75mm (LxWxH)

연관제품