4채널 30A USB 릴레이 -딜레이 기능

(TSRU430- 4 Channel 30A USB Relay Board)

개요

  • 본 제품은 1채널 30A USB 릴레이입니다.
  • 12VDC로 동작하며, DC 잭은 2.1mm (center positive)입니다.
  • 릴레이는 SPST-NO 타입입니다.
  • 또한 딜레이 기능을 가지고 있어 각각의 릴레이를 0초에서 24시간까지 딜레이를 주어 릴레이를 제어할 수 있습니다.

특징

  • Relay power rating
    If the relay is used at a voltage or current exceeding this specification, the life of the contacts may be significantly shortened.

    A full datasheet for the relays used on the TSRB430 is here: G8P datasheet

     

    First Step - Install the Driver

    USB Bee module uses a CP2102 USB to UART chip. Before using it you need to download the CP210x Driver.

    Connect the module to computer's USB port and windows will detect it and ask for the drivers. Point windows to the inf folder and it will install the driver.

    A new com port will now appear

    Commands
    The TSRU430 operates with an easy to use command set as described in the table below.

    TOSR0x Baud rate : 9600

     

    Test program

    To get the TSRU430 up and running in the minimum amount of time we have put together an example program to demonstrate the functionality of the module.

     

     

문서

연관제품