4채널 USB/무선 5V 래치/순간 릴레이 모듈 -패스워드 지원, WiFi

(TOSR142 - 4 Channel Smartphone WiFi Relay

- (Password/Momentary/Latching))

개요

  • 본 제품은 4채널 USB/무선 5V 래치/순간 릴레이 모듈입니다.
  • 패스워드를 지원하며, 릴레이를 설정하여 래치형 릴레이로 만들거나 순간형 릴레이로 만들 수 있습니다.
  • 릴레이 모듈은 USB에 연결하여 PC에서 제어도 가능합니다.
  • 릴레이에 Xbee, Bluetooth Bee, Wifly WiFibee 모듈을 연결하여 릴레이를 원격으로 제어할 수 있습니다
  • 릴레이모듈은 USB 혹은 DC 잭(2.1mm, center positive)으로 전원 공급이 가능하며, 채널당 10A까지 스위칭이 가능합니다.
  • 한개의 DS18B20 온도 센서 포트가 있습니다.
  • 릴레이는 SPDT 타입니다.
  • WiFi 모듈이 장착된 버전입니다.

특징

  • Note: Relay board default password is: 123456

    Note: Please remove the WiFi module when you use USB connection.

    Smartphone APP:

    We also provide FREE Android/iOS App. You can control your device by your phone very easily.

           

     

    Android APP(WiFi)

    iPhone APP (WIFI)

     

    Relay power rating
    If the relay is used at a voltage or current exceeding this specification, the life of the contacts may be significantly shortened.

    A full datasheet for the relays used on the TOSR142 is here: G5LA datasheet

    If you use DC Power ,the Input voltage should be DC5V.

    First Step - Install the Driver
    The TOSR142 module uses FT232RL USB to UART chip . Before using the TOSR142 you will need to download the FT232RL Driver.

    Connect the TOSR142 and windows will detect it and ask for the drivers. Point windows to the inf folder and it will install the driver.

    The TOSR142 will now appear as a com port.

    Commands
    The TOSR142 operates with an easy to use command set as described in the table below.

    TOSR142 Baud rate : 9600

    Test program
    To get the TOSR142 up and running in the minimum amount of time we have put together an example program to demonstrate the functionality of the module.

     

     

     

  • Working voltage: 5VDC
  • Dimension: 124x45x17.2(mm)
  • Standby Current 10mA/5VDC
  • Current rating of up to 10 Amp.
  • Latching or momentary ouputs
  • Password supported

문서

연관제품