This Project Contains:

• PiTFT Plus Assembled 320x240 2.8" TFT + Resistive Touchscreen
• Adafruit Arcade Bonnet for Raspberry Pi with JST Connectors - Mini Kit
• Laser-cut Acrylic Cupcade Enclosure
  • 25 x Nylon 4-40 Hex nuts
  • 25 x Nylon 1/2" Pan Screws
• 8 GB SD/MicroSD Memory Card  BLANK SD CARD! You will have to burn the SD card with a RetroPie image
• Analog 2-axis Thumb Joystick with Select Button + Breakout Board
• 2 x 16mm Panel Mount Momentary Pushbutton - Black
• 2 x 16mm Panel Mount Momentary Pushbutton - Red
• Arcade/Button Quick-Connect Wire Pair - Set of 10 pairs
• GPIO Ribbon Cable for Raspberry Pi
• 2x20 Extra Tall Female Header
• 4 Ohm 3W Mono Speaker
• Premium Female/Female Jumper Wires - 20 x 6"

There are four buttons total, two next to the joystick for "fire" and "jump" and two in front for "coin" and "start". If you set up your Cupcade for 'horizontal' alignment, you can run 'TV' video games. If you set up for 'vertical' alignment, you can play classic MAME games that had vertical game grids.

Many details stand out here that show the love and care PaintYourDragon put into this kit.

• First: you can configure it for either vertical (Ms Pacman! Donkey Kong! Arkanoid!) or horizontal screen (Joust! Qix! Nintendo!). The controls can be set to either joystick-in-center or to the side. We provide for both configurations just pick which you want during construction.
• Second: We include a blank SD card that can be burned with RetroPie, the most popular Raspberry Pi arcade software
• Third: The display is small, but looks great - we take advantage of the optimized-for-HDMI software and then mirror the HDMI output to the small TFT
• Fourth: To load new ROMs, simply plug in the SD card into any computer and drag the zipped up files into the directory. Or use WiFi to install over a shared folder.
• Fifth: What's gaming without the noise? There's a mono speaker that uses digital I2S so all your sounds and bleeps will be just the way you remember. There's digital volume control within RetroPie