RS232 서비스 툴키트 -RS232 분석/점검/수리

(IFTOOLS RS232 Service Toolkit)

 

개요

  • 본 제품은 MSB-RS232 Analyzer를 비롯하여 RS232 분석에 필요한 모든 제품을 포함한 RS232 서비트 툴키트입니다.
  • 엔지니어, 테크니션, 개발자를 위한 툴로 RS232 장치를 분석하고, 설치하고, 고치고, 점검하는데 사용되는 제품입니다.

특징

  • MSB-RS232 Analyzer
    Baud Rates Any baud rate between 1Baud...1MBaud
    Data Format 5...9 Data bits, none, even, odd, mark, space parity, any stop bits
    Logical Linestates Detection and display of logical linestates:
    1 (V+), 0 (V-), invalid (-1.3V < IN < +1.3V
    Time resolution 1µsec for all line change events (hardware based, OS independent)
    Signal input RS232 standard level, ±7V to ±12V, ESD protected inputs 5kΩ
    Bus connectors Standard D-Sub 9pin connectors, male and female, linked through high speed and via software switchable RS232 buffers
    Logic Mode All RS232 inputs are adjustable as logic inputs with trigger level 1.3V, 5kΩ
    Operation The analyzer marks every event (data byte, signal alternation) with a time stamp in 1µs resolution (independent of the PC) and send the information via USB to the connected PC
    Featuring Real time analysing and simultaneous access/display of different record parts even during an active recording
    Capacity 4GByte max. record file size on PC for real time analysing. Unlimited (or free hard disk space) records when using the special command line API for long time recordings
    Record time The record time depends on the selected kind of events and data rate of the connection
    Supported Protocols 3964(R), BACNet, DF1, DNP3, IEC60870, MDB, Modbus (ASCII + RTU), Profibus, SAE-J1587, SAE-J1922, SRecord, USS, 9-Bit.
    Individual protocols Adaption of any protocol and telegram display with own protocol templates written in Lua
    Switch Option The activated Switch Option consists of an integrated schematic switch editor which extends the analyzer by the capability to interactively alter the signals lines, inject data, reroute and invert RS232 lines.
    RS232 Interface Tester
    Connectors 9 or 25 RS232 D-Sub male/female.
    RS232 lines TXD, RXD, RTS, CTS, DSR, DCD, QM, SRTS, DTR
    Line status Red/green LEDs for every line indicating green=idle (logic 1), red=active (logic 0) or invalid (off) line state.
    Plastic case
    Material Polypropylen (PP)
    Dimension 255mm x 210mm x 48mm
    Weight ca. 640g with content
  • Package Content

    • 1 x Practical storage case

    • 1 x MSB-RS232 Analyzer with activated Switch Option

    • 1 x USB cable to connect the analyzer with your PC

    • 1 x W232 cable for non-interruptable analysis

    • 1 x Led tester 25pin for a first check

    • 1 x 25pin DSub male to 9pin female adapter

    • 1 x 25pin DSub female to 9pin male adapter

    • 1 x Null modem adapter

    • 1 x Loopback adapter

    • 1 x 9pin DSub male to male Gender Changer

    • 1 x 9pin DSub female to female Gender Changer

    • 1 x CDROM with Software (Windows + Linux), 300-page manual (PDF), drivers and additional tools

문서

연관제품