트린켓 M0 SAMD21 보드 -파이썬 & 아두이노 IDE

(Adafruit Trinket M0 - for use with CircuitPython & Arduino IDE)

IMG_0242

IMG_0242

개요

  • 본 제품은 Atmel ATSAMD21 칩을 탑재한 마이크로컨트롤러 보드입니다.
  • CircuitPython으로 프로그래밍이 가능한 작고 저렴한 보드이지만 강력한 성능을 가진 제품입니다.
  • 보드를 USB에 연결하면 작은 디스크 드라이브로 나타나며, main.py 코드가 드라이브에 있는 것을 확인할 수 있습니다.
  • Python코드인 main.py를 수정하여 프로젝트를 빌드 할 수 있습니다.

특징

  • Here are some of the updates you can look forward to when using Trinket M0:

    • Same size, form-factor, and pinout as classic Trinket
    • Updating ATtiny85 8-bit AVR for ATSAMD21E18 32-bit Cortex M0+
    • 256KB Flash - 32x as much as 8 KB on ATtiny85
    • 32 KB RAM - 64x as much as 512 bytes on ATtiny85
    • 48 MHz 32 bit processor - 6x as fast as ATtiny85 (not even taking into account 32-bit speedups)
    • Native USB supported by every OS - can be used in Arduino or CircuitPython as USB serial console, Keyboard/Mouse HID, even a little disk drive for storing Python scripts. (ATtiny85 does not have native USB)
    • Can be used with Arduino IDE or CircuitPython
    • Built in green ON LED
    • Built in red pin #13 LED
    • Built in RGB DotStar LED
    • All 5 GPIO pins are available and are not shared with USB - so you can use them for whatever you like!
      • Five GPIO pins with digital input/output with internally connected pullups or pulldowns
      • Three of the I/O pins can be used for 12-bit analog input
      • True analog output on one I/O pin - can be used to play 10-bit quality audio clips
      • We gave the M0 pads the exact same names as the original Trinket so all your existing Arduino code will work exactly the same as-is without changes
      • Two high speed PWM outputs - for servos, LEDs, etc
      • Three pins can also be used as hardware capacitive touch sensors with no additional components required
      • Can drive NeoPixels or DotStars on any pins, with enough memory to drive 8000+ pixels. DMA-NeoPixel support on one pin so you can drive pixels without having to spend any processor time on it.
      • Native hardware SPI, I2C and Serial available on two pads so you can connect to any I2C or Serial device with true hardware support (no annoying bit-banging). You can have either one SPI device or both I2C and Serial.
    • Same Reset switch for starting your project code over
    • Power with either USB or external output (such as a battery) - it'll automatically switch over
    • Mounting holes! Yeah!
    • Really really small

    Each order comes with one fully assembled and tested Trinket M0 with CircuitPython & example code programmed in.

    So what are you waiting for? Pick up a Trinket M0 today and be amazed at how easy and fast it is to get started with Trinket and CircuitPython!

문서

  • Dimensions:

    • 27mm x 15.3mm x 2.75mm / 1.07" x 0.6" x 0.1"
    • Height with MicroUSB: 3.5mm / 0.14"
    • Weight: 1.4g
  • Adafruit Trinket M0

연관제품