MCP1664

고전압 스텝업 LED 드라이버 -MCP1664

(MCP1664 click)

IMG_0242

IMG_0242

개요

  • 본 제품은 4개의 고출력 LED와 고전압 스텝업 LED 드라이버 MCP1664 를 탑재하고 있는 모듈입니다.
  • 3.3V 혹은 5V로 동작이 가능하며 타켓 MCU와는 PWM핀을 통해 통신합니다.


특징

  • How the MCP1664 click works

    The click has a power input and a PWM input, so you can set the light intensity at the level you want.

    MCP1664 IC features

    The MCP1664 is a compact, space-efficient, fixed-frequency, non-synchronous step-up converter optimized to drive multiple strings of LEDs with constant current powered from two and three-cell alkaline or NiMH/NiCd as well as from one-cell Li-Ion or Li-Polymer batteries.

    The MCP1664 features an open load protection (OLP) which turns off the operation in situations when the LED string is accidentally disconnected or the feedback pin is short-circuited to GND.

    While in Shutdown mode (EN = GND), the device stops switching and consumes 40 nA typical of input current.

    Specifications

    Type Boost
    Applications White LED Driver for Backlighting Products, Li-IonBattery LED Lightning Application, etc.
    On-board modules MCP1664 module from Microchip
    Key Features You can set the light intensity
    Interface PWM
    Input Voltage 3.3V or 5V
    Compatibility mikroBUS
    Click board size L (57.15 x 25.4 mm)

    Pinout diagram

    This table shows how the pinout on RN4871 click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).

    Notes Pin Mikrobus logo.png Pin Notes
    NC 1 AN PWM 16 PWM PWM input
    NC 2 RST INT 15 NC
    NC 3 CS TX 14 NC
    NC 4 SCK RX 13 NC
    NC 5 MISO SCL 12 NC
    NC 6 MOSI SDA 11 NC
    Power supply +3.3V 7 3.3V 5V 10 +5V Power supply
    Ground GND 8 GND GND 9 GND Ground

    Maximum ratings

    Description Min Typ Max Unit
    Supply Voltage 2.4 5.5 V
    Max Out Voltage 32 V
    Max Out Current 4.2V Vin 8 LEDs 150 mA
    Max Out Current 3.3V Vin 4 LEDs 200 mA
    Max Out Current 5.0V Vin 4 LEDs 300 mA

문서

연관제품