베리GPS -라즈베리 파이용 GPS 모듈

(BerryGPS -GPS for Raspberry Pi, MT3337)

개요

  • 본 제품은 라즈베리 파이와 사용이 가능한 BerryGPS 모듈입니다.
  • 라즈베리 파이 제로 사이즈의 크기를 가지고 있으며, 제로뿐 아니라 모든 버전의 라즈베리 파이와 사용이 가능합니다.
  • Antenova사의 M10478-A2( MT3337-E chip)을 사용하여 22개의 위성을 추적할 수 있습니다.
  • 모듈에는 안테나가 내장되어 있습니다.
  • 슈퍼캐패시터가 배터리 백업 램의 GPS 데이터를 4시간동안 유지시켜 주어 모듈에 전원이 반복해서 들어오는 상황시에 빠른 acqusition이 가능하게 하여 줍니다.
  • Fix가 획득되면 Fix LED가 초당 한번씩 깜빡입니다. Fix 신호는 출력 핀에도 나타납니다.
  • BerryGPS에는 PPS(Pulse Per Second) 기능이 포함되어 있습니다. 펄스시에 깜빡이는 LED와 출력 핀은 마이크로컨트롤러에서 시간을 동기화할시에 사용이 가능합니다.
  • Standby Pin은 GPS 모듈을 standby mode로 진입시킵니다.
  • 전류소비를 절약하기 위한 periodic mode가 있어 Fix 데이터를 유지하기 위한 짧은 시간에만 모듈이 wakeup 되게 지원합니다.
  • 보드에는 UFL 커넥터가 있어 외장 GPS 안테나를 연결할 수 있습니다.

특징

  • BerryGPS is compatible will all models of Raspberry Pi, including Pi 2, Pi 3 and Zero.

  • Dimensions; 65 mm x 30 mm

    Weight =  5gm

    GPS Module MT3337

    • Low current consumption, <200uA when using Periodic mode.
    • Antenova M10478-A2  ( MT3337-E chip) GPS module
    • 3.3v supply
    • NMEA 0183
    • UART  4800/9600/38400/115200 bps
    • Channels – 210 PRN / 66 Acquisition / 22 Tracking
    • Max update rate 5 Hz
    • Horizontal position accuracy <2.5m CEP
    • Acquisition sensitivity -148dBm
    • Tracking sensitivity -165dBm
    • Hot start <1s
    • Warm start <25s
    • Cold start <35s
    • Orbit prediction
    • 1PPS Sync
    • Fix LED
    • PPS LED
    • Internal antenna
    • Connector for external antenna
    • SuperCap to help store ephemeris data.

    BerryGPS should only be powered with a 3.3v power supply.

    BerryGPS comes with;

    • BerryGPS PCB
    • 1 x Female header
    • 4 x Nylon standoffs, nuts and screws

     

    Raspberry Pi and Antenna are not included.

    Some very basic soldering is required to solder on the female header.

문서

연관제품