스퀘어 웨이브 신호 생성기 -NE555

(Square Wave Signal Generator -NE555)

IMG_0242

IMG_0242

 

개요

  • 본 제품은 스퀘어 웨이브 신호를 생성할 수 있는 신호생성 모듈입니다.
  • 실험적인 개발 용도나 스텝모터를 동작시키는 어플리케이션이나 마이크로컨트롤러 어플리케이션을 위한 펄스 조절용으로 사용이 가능합니다.
  • NE555 타이머 칩이 탑재되어 있으며, 4개의 주파수 범위(보드상 점퍼로 설정)에서 사용 가능하게 디자인 되었습니다.
  • 출력 주파수와 듀티 사이클은 장착된 두개의 트림 포텐셔미터로 조절이 가능합니다.
  • 모듈의 입력전압은 5-15VDC이며 약 15mA@5V(35mA@12V)를 소비합니다.

특징

  • Size: 3.1CM * 2.2CM
  • the main chip: NE555;
  • Input voltage: 5V-15VDC. When 5V supply, the output current can be at around 15MA; when the 12V supply, the output current can be about 35MA;
  • the input current: ≥ 100MA
  • the output amplitude:. 4.2V V-PP to 11.4V V-PP (different depending on the input voltage, the output amplitude will be different)
  • the maximum output current: ≥ 15MA (5V power supply, V-PP greater than 50%), ≥ 35MA (12V power supply, V-PP greater than 50%)
  • Output with LED indication, there is no output straightforward (LOW LED quantity, high LED off, LED blink rate is relatively low);
  • The output frequency range of grades available, the output frequency more continuously adjustable;
    • LF file: 1Hz ~ 50Hz
    • IF file: 50Hz ~ 1kHz
    • High frequency file: 1KHz ~ 10kHz
    • High-frequency file: 10kHz ~ 200kHz
  • You can fine-tune the output duty cycle, duty cycle and frequency are not adjustable, adjust the duty cycle will change the frequency
  • The output frequency is adjustable: Cycle T = 0.7 (RA +2 RB) C
    • RA, RB is 0-10K adjustable;
    • At low frequencies file C = 0.001UF;
    • Medium frequency when C = 0.1UF;
    • High frequency file C = 1UF;
    • When high-frequency gear C = 100UF, so the frequency of the waveform buyers can own calculations

문서

  • Image result
  • Image result

연관제품