RFM96 LoRa 지원 피더 M0 보드 -433MHz
(Adafruit Feather M0 RFM96 LoRa Radio - 433MHz)
개요
- 본 제품은 피더 M0 RFM96 LoRa Radio 433Mhz 보드입니다.
- ATSAMD21G18 마이크로컨트롤러와 장거리 통신용 LoRa 패킷 라디오 트랜시버, USB, 배터리 충전회로가 장착된 제품입니다.
- 433Mhz를 사용하며 WiFi와 같은 많은 전력 소모 없이 또 BLE 보다 더 유연하게 무선 네트워크를 구성할 수 있습니다.
- Feather M0에는 아두이노 제로에서 사용된 ATSAMD21G18 ARM Cortex M0 프로세서가 사용되고 있습니다.
- 이 칩은 내장된 USB 기능이 있어 FTDI사의 USB-Serial 칩과 같은 칩이 필요 없습니다.
- 휴대용이나 이동성이 좋은 프로젝트를 위해서 3.7V 리튬 폴리머 배터리 커넥터를 장착하고 있으며 보드에는 배터리 충전회로를 내장하고 있습니다.
- 배터리가 없다면 microUSB 커넥터를 통해 전원공급이 가능합니다.
- 배터리가 뽑혀 있는 상태에서 USB 케이블을 연결한다면 자동으로 USB 전원으로 전환됩니다.
- divider를 통해 배터리를 아날로그 핀에 연결하여 놓아서 배터리 전압 레벨을 모니터링 할 수 있습니다.
특징
-
Here's some handy specs! Like all Feather M0's you get:
- Measures 2.0" x 0.9" x 0.3" (51mm x 23mm x 8mm) without headers soldered in
- Light as a (large?) feather - 5.8 grams
- ATSAMD21G18 @ 48MHz with 3.3V logic/power
- No EEPROM
- 3.3V regulator with 500mA peak current output
- USB native support, comes with USB bootloader and serial port debugging
- You also get tons of pins - 20 GPIO pins
- Hardware Serial, hardware I2C, hardware SPI support
- 8 x PWM pins
- 10 x analog inputs
- 1 x analog output
- Built in 100mA lipoly charger with charging status indicator LED
- Pin #13 red LED for general purpose blinking
- Power/enable pin
- 4 mounting holes
- Reset button
This Feather M0 LoRa Radio uses the extra space left over to add an RFM9x LoRa 868/915 MHz radio module. These radios are not good for transmitting audio or video, but they do work quite well for small data packet transmission when you need more range than 2.4 GHz (BT, BLE, WiFi, ZigBee).
- SX127x LoRa® based module with SPI interface
- Packet radio with ready-to-go Arduino libraries
- Uses the license-free ISM bands (ITU "Europe" @ 433MHz and ITU "Americas" @ 900MHz)
- +5 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software)
- ~300uA during full sleep, ~120mA peak during +20dBm transmit, ~40mA during active radio listening.
- Simple wire antenna or spot for uFL connector
Our initial tests with default library settings: over 1.2mi/2Km line-of-sight with wire quarter-wave antennas. (With setting tweaking and directional antennas, 20Km is possible).
문서
- SX127x Datasheet - The radio chip itself
- RFM9X - The radio module, which contains the SX1272 chipset
- FCC Test Report
- ETSI Test Report
- RoHS Report
- Product Dimensions: 50.8mm x 23.0mm x 7.2mm / 2.0" x 0.9" x 0.3"
- Product Weight: 5.6g / 0.2oz
- Adafruit Feather M0 Radio with LoRa Radio Module
연관제품
- 연관제품 1