RFduino -심블리 스타터 키트
(RFduino - Simblee Starter Kit)
개요
- 본 제품은 Simblee 스타터 키트입니다.
- Simblee를 시작하기 위한 세개의 제품( Simblee DIP mainboard, the USB programming shield, and the RGB LED/Button shield)이 포함된 제품입니다.
- 심블리 메인보드와 USB 프로그래밍 쉴드를 부착하여 PC의 USB 포트와 통신할 수 있으며, 아두이노 IDE를 통해 코드를 작성할 수 있습니다.
- RGB LED/Button 쉴드를 통해서는 몇몇 입력과 출력을 테스트하여 볼 수 있습니다.
- Simblee는 블루투스 4.0 BLE 모듈로 ARM Cortex-M0를 내장한 프로토타이핑 보드입니다.
- 3.3V에서 동작하며 Rx모드상에서 단 10mA만 소비합니다. 238kb 플래쉬 메모리와, 24kb 램을 가지고 있으며, 2.4Ghz 대역에서 통신합니다.
- 블루투스 연결을 통해 스마트폰에서 Simblee 보드의 데이터를 읽거나 제어할 수 있습니다.
- Note: The custom user interface requires a smartphone app. The app is currently available for iOS and should be available for Android in early 2016.
특징
- Operating Voltage: 3V (Max 3.6V, Low 1.8V)
- Transmit/Recieve Current: 8-16mA (<3uA ULP)
- ARM Cortex M0 processor (running at 16MHz)
- 128KB Flash
- 24KB RAM
- Build iPhone and Android apps without Xcode or the Android SDK
- Built in AES encryption engine
- -93dBm receiver sensitivity
- -55dBm to +4dBm TX power
- 7 GPIO pins (6 with 10-bit Analog input)
- PWM, UART, SPI, I2C capabilites on most GPIO pins
- UART Programming over USB or Over the Air Programming
- CE, ETSI, IC, TELEC, and FCC approved
- Includes:
문서
- SparkFun Simblee Product Line
- Schematic (USB Shield)
- Schematic (RGB/Button Shield)
- Datasheet
- Quickstart Guide
- User Guide
- PCB Layout (USB Shield)
- PCB Layout (RGB/Button Shield)
- Simblee for Mobile iOS from the App Store
- Simblee Concepts