NRF24 RF-Nano 아두이노 보드 -ATmega328, NRF24L01+
(NRF24 Nano Duino Board -ATmega328, NRF24L01+)
개요
- 본 제품은 NRF24 RF-Nano 아두이노 보드 -ATmega328, NRF24L01+입니다.
- ATmega328 칩을 기반으로 디자인된 아두이노 나노 폼팩터를 가지고 있으며, 2.4Ghz 원거리 통신이 가능한 NRF24L01+ 무선 트랜시버를 탑재한 제품입니다.
- 원리 무선 통신이 필요한 어플리케이션에서 사용이 가능하며, 아두이노 IDE 환경에서 개발이 가능합니다.
특징
- Creative products, RF-Nano-Board: Upgraded nano board for arduino, The main chip is ATMEGA328P-MU QFN32,the latest bootloader (Arduino IDE 1.8.8) was burned down. It is fully compatible with the common nano board. RF-Nano-Board is PIN-PIN with Arduino Nano V3.0, and share the same codes.
- More convenient for application: The RF-Nano-Board integrates a NRF24L01+ module with arduino nano v3.0 board, which is very convenient for 2.4G wireless connect application.
- High quality material and Technology: We used high quality PCB original material and Immersion Gold Technology to make sure every board has smooth edge and more reliable.
- Super small volume design, more convenient to use: The PCB size is only 48x19mm, the pin is fully compatible with Nano V3.0, No Soldering needed. The micro usb port is more convenient to use.
- Complete Information reference: RF-Nano-Board using CH340 chip to UART, you can download mac, windows, linux three system drivers, datasheets and schematics and other informations from here
-
Microcontroller ATmega328PNrf24L01+ 2.4G wirelessArchitecture AVROperating Voltage: 5 VFlash Memory: 32 KB of which 2 KB used by bootloaderSRAM: 2 KBClock Speed: 16 MHzAnalog I/O Pins: 8EEPROM: 1 KBDC Current per I/O Pins: 40 mA (I/O Pins)Input Voltage: 7-12 VDigital I/O Pins: 22PWM Output: 6Power Consumption: 19 mA
-
◆ It is fully compatible with the nano-v3.0 pin and its usage method◆ BLE chip: TI CC2540◆ Work channel: 2.4G◆ Transmission distance: 50m◆ Supports AT directive to configure BLE◆ Support USB virtual serial port, hardware serial port, BLE three-way transparent transmission◆ Support master and slave switch◆ Supports sending over 20byte.◆ Supports iBeacons◆ Interface: Micro-USB◆ Input voltage: USB power supply, Vin6~12V, 5V◆ MCU: ATmega328P-MU QFN32◆ Bootloader: Newest 1.8.8◆ Pin: Two Lines 2.54mm-15Pin◆ Size: 48mm x 19mm x 12mm
-
Note:
Please use IDE 1.8.6 or higher version, First, install the CH340 driver, then follow this selection path in IDE: Tools - Board“ Nano” Processor “ATmega328P",otherwise you'll find that you can't burn any program.