ISM RX 무선 데이터 수신 모듈 -MAX1471, SPI, 433Mhz
(ISM RX CLICK)
개요
- 본 제품은 ISM RX 무선 데이터 수신 모듈 -MAX1471, SPI, 433Mhz 입니다.
- 저전력 CMOS RF 듀얼 채널 리시버로 SPI 인터페이스를 통해 설정이 가능한 제품입니다.
- 3V 혹은 5V 에서 동작하며, FSK 및 ASK 데이터를 디바이스 재설정 없이 수신이 가능하게 디자인되어 있습니다.
- 433Mhz를 지원합니다.
특징
-
Type Sub-1 GHz Transceievers Applications Can be used for remote low-speed communication, such as remote keyless access, garage or gate doors control, industrial control, home automation, and similar applications where this kind of communication is applicable On-board modules MAX1471 - low-power CMOS superheterodyne receiver for both ASK and FSK data without reconfiguration from Maxim Integrated Key Features Low power consumption, ASK and FSK demodulated data selection, programmable through serial user interface, low current consumption, and more. Interface SPI Compatibility mikroBUS Click board size L (57.15 x 25.4 mm) Input Voltage 3.3V or 5V -
ISM RX Click as its foundation uses the MAX1471, a low-power CMOS superheterodyne receiver for both ASK and FSK data without reconfiguration from Maxim Integrated. It includes all the active components such as a low-noise amplifier, an image-reject mixer, a fully integrated PLL, 10.7MHz IF limiting amplifier received-signal strength indicator, low-noise FM demodulator, and a 3V voltage regulator. The MAX1471 can achieve data rates as high as 33kbps using Manchester Code (66kbps nonreturn to zero) depending on signal power and component selection.
As already mentioned before, this Click board™ can receive both ASK and FSK data simultaneously. This feature of the MAX1471 can be achieved and selected with the switch labeled as DMOD SEL that allows the selection between ASK and FSK data. The MAX1471 receives binary FSK or ASK data on a frequency of 433.92MHz, which is set based on the used components. ASK modulation uses a difference in the carrier's amplitude to represent logic 0 and logic 1 data, while the FSK uses the difference in frequency of the carrier.
Differential peak-detecting data demodulators are available for both the FSK and ASK analog baseband data recovery. The MAX1471 consists of a discontinuous Receive mode for low-power operation, configured through a serial interface. This mode also allows self-polling, where the MAX1471 can stay in Sleep mode as long as eight minutes and wake the system MCU, offering additional power savings. On the consumption side, it draws less than 1.1µA in Shutdown and only 7mA in Receive mode.
ISM RX Click communicates with MCU using a standard SPI interface and possesses the SMA antenna connector with an impedance of 50Ω. This Click board™ can use it to connect the appropriate antenna that Mikroe has in its offer, such as Rubber Antenna 433MHz Straight, for improved range and received signal strength.
This Click board™ operates only with a 5V logic voltage level from the mikroBUS™ socket. Still, the MAX1471 power supply offers the possibility of using both 3V, obtained by the NCP170 voltage regulator, and 5V logic voltage level selected via the HVIN SEL jumpers. Note that all the jumpers must be placed to the same side, or else the Click board™ may become unresponsive. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.
