ESP32-C3 소형 보드 -USB C
(ESP32-C3 Tiny Board -USB C)
개요
- 본 제품은 ESP32-C3 소형 보드 -USB C 입니다.
- ESP32-C3 칩을 탑재한 제품으로 USB C 커넥터, 부트버튼, 리셋버튼을 가지고 있으며 보드 양 옆면을 통해 GPIO 접근이 가능합니다.
- 아두이노 개발환경에서 개발이 가능합니다.
특징
-
CPU: ESP32-C3, 32-bit RISC-V single core processorOperating frequency: 160 MHzMain frequency: 160MSRAM: 400KBROM: 374KBADC: 2 * 12-bit SARADC, 6 channelsWiFi: 802.11b/g/n protocol, 2.4GhHz, supports Station mode, SoftAP mode, SoftAP+Station mode, hybrid modeBluetooth: BT 5.0Power consumption: Deep sleep power consumption is about 43 μ ARich on chip resources: 400KB SRAM, 384KB ROMRich interfaces: 1xI2C, 1xSPI, 2xUART, 11xGPIO (PWM), 4xADCSingle sided components, surface mount designClassic appearance, suitable for wearable devices and small projectsReliable security features: Encryption hardware accelerator supporting AES-128/256, hashing, RSA, HMAC, digital signature, and secure bootOn board LED blue light, GPIO8 pin
-
Attention:If external power supply is required, simply connect the external power supply+level to the 5V position and connect the GND to the negative pole. (Supports 3.3-6V power supply). Remember that when connecting to an external power source, USB cannot be connected, and only one can be selected between USB and external power supply.2. Please be careful not to short-circuit the positive and negative electrodes during welding, which may burn out the battery and equipment.Instructions for use:Enter download mode: Press and hold the BOOT button of ESP32C3, then press the RESET button, release the RESET button, and then release the BOOT button. At this point, ESP32C3 will enter download mode. (Every time you connect, you need to re-enter the download mode. Sometimes, if you press it once, the unstable port will disconnect, which can be determined by identifying the sound through the port.)
문서
연관제품
- 연관제품 1