EEPROM 메모리 -S-34C04AB
(EEPROM 11 CLICK)
개요
- 본 제품은 EEPROM 메모리 -S-34C04AB입니다.
- I2C 인터페이스를 가지고 있으며, 3.3V로 동작합니다.
- 4Kbit의 용량을 가지고 있습니다.
특징
-
HOW DOES IT WORK?
EEPROM 11 Click is based on the S-34C04AB, an EEPROM memory for DIMM serial presence detection from ABLIC. The EEPROM uses a Schmitt trigger and noise filter on the I2C bus for noise suppression. The S-34C04AB has a timeout function that can reset the I2C interface and return to standby mode. This timeout is typically 30ms. The EEPROM also allows you to write a byte or a page. The page write mode allows up to 16 bytes to be written in a single operation. The IC also has set protection for block n, clear write protection for all blocks, and read protection status for block n. As for reading, you can read a current address, a random read, or a sequential read.
EEPROM 11 Click uses a standard 2-wire I2C interface to communicate with the host MCU, supporting clock frequencies of up to 1MHz. You can set the desired I2C address over three ADDR SEL jumpers, with 0s selected by default.
This Click board™ can be operated only with a 3.3V logic voltage level. The board must perform appropriate logic voltage level conversion before using MCUs with different logic levels. Also, this Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used as a reference for further development.
SPECIFICATIONS
Type EEPROM Applications Can be used for the development of consumer electronics, office equipment, communication devices, medical equipment, automobile equipment, and more. On-board modules S-34C04AB - EEPROM memory for DIMM serial presence detection from ABLIC Key Features EEPROM for DIMM serial presence detect, can write 16 bytes per page, long endurance and data retention, JEDEC standard-compliant, low-current operation, write protection, noise suppression, and more Interface I2C ClickID Yes Compatibility mikroBUS Click board size S (28.6 x 25.4 mm) Input Voltage 3.3V