CANBed DUAL 아두이노 CAN 보드 -RP2040, CAN2.0, CAN FD
(CANBed DUAL - RP2040 based Arduino CAN Bus -CAN2.0 & CAN FD)
개요
- 본 제품은 CANBed DUAL 아두이노 CAN 보드 -RP2040, CAN2.0, CAN FD 입니다.
- 2개의 독립적인 CAN2.0/CAN FD 채널 인터페이스를 가지고 있는 제품으로 RP2040 칩을 기반으로 디자인되었습니다.
- CAN 컨트롤러로는 GD32E103CBT6 칩을 사용합니다.
특징
- High Performance: Powered by RP2040 with 264KB of SRAM, and 2MB of onboard Flash memory
- Support two CAN protocols: CAN-FD and CAN 2.0
- CAN controller: GD32E103CBT6, dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz
- Multiple interfaces: One I2C, One UART, One 2x3 Pin SPI Interface
-
Parameter
Details
MCU
RP2040
Processor
Dual ARM Cortex-M0+
Clock Speed
flexible clock running up to 133MHz
Flash Memory
2MB
RAM
264KB
Operate Voltage
9-28V
Output Current @3.3V
1A
Input Interface
sub-D
- CANBed Dual is a CAN Bus development board with 2 independent CAN FD interfaces based on RP2040. It uses GD32E103CBT6 as the CAN controller with an operating frequency is up to 133MHz, which is suitable for most embedded applications.
-
Here is a new member of the CAN Bus family in Seeed, let's shed some light on CANBed DUAL!
CANBed DUAL, a CAN Bus development board, is based on the RP2040 chip which is the debut microcontroller from Raspberry Pi. It brings signature values of high performance, low cost, and ease of use to the microcontroller space. There are 264 KB of SRAM and 2MB of Flash memory on board. The operating frequency is up to 133MHz, and it contains a 6PIN Terminal and a flexible Micro USB connector where you can either program the board or supply power to the board. The voltage input range is 9-28V which provides a stable 5V/1A output. There are also rich interfaces on board including one I2C, one UART, one SPI interface, three analog input interfaces, and eight digital IO
CANBed DUAL has two independent CAN Bus interfaces which are CAN2.0 and CAN FD, and it uses high-performance GD32E103CBT6 as the CAN controller. With CANBed Dual, you can learn CAN Bus communication, build product prototypes and read the data from the car. Also, as a part of your product, it integrates the processes of designing the MCU and the CAN Bus, and you only need to complete other hardware designs.
